the numerous screenshots of two Prime95 running with Smart Guardian on top of it. See how it worked for you guys. I have a dual-core cpu (as listed below in my sig) and I'm trying to get two instances of Prime95 going at the same time, one for each core. I...

Thats for your consideration OC and Prime95 Question: Boards today are protected from damage due OC. If your board is not get another brand. As to my previous post Prime95 will increase the electrical load of you...

Phenom X4 9600 strees test. I just got a brand new Phenom I 9600 and I was to stress test it with Prime95. Question, do I have to have 4 instances of Prime95 running in order to strees test this quad core? Or can I can just run 4 "workers" with only 1 instance...

Quick question about prime95. with prime i heard that there is something you have to do in the bios. or maybe its in the operating system. so when the computer blue screens you can actualy see what the errors where first. does anyone know what this is and...

Is Prime95 running too hot?. I'm running Prime95 on a new build - an i7 860 that is running at stock speeds with the stock cooler. SpeedFan is reporting the cores are running at ~62-65 C. Real Temp 3.0 is reporting the cores running at ~77-80 C. Which is...

Prime95 - e8500: Core 1 ok, Core 2 encountering errors. After running it on blend for 2 5-hour tests, both times my CPU 1 ran the full duration with 0 errors but the second CPU would encounter an error within 30 mins to an hour. I currently have my FSB set...

Prime95 torture test cpu temps in the 90's C. Why?. I am going to give you info on items in my build that I think would be relavant. I ran Prime95 torture test and was getting temps in the upper 80's to mid 90's C in less than 10 min. running. Temp monitoring...

Core i7 920 @ 4.0 Ghz in Prime95. I've OC'd my core i7 920(c0) to 4.0ghz, and it idles at around 60*C, I'm using a Zalman CNPS10X Extreme HSF, is this normal, or too high at idle? When running prime95 under full load my cpu hits 90*C! Should I downclock my...

Prime95. So i ran Prime for 22 hrs with no errors yesterday. I am at 16x-220fsb-1.39 volts. I started Prime again last night and it crashed before i got up this morning. That has got me a little confused. Does anyone have any ideas or suggestions? . So i ran...

Prime95 error codes. Ok so I am overclocking my e7300. I have it at 3.4ghz with voltage at 1.272v. I run prime95 and it runs for like 2 hours and then stopped only on one core and gave me this error message. FATAL ERROR: Final result was 16295BCF, expected:...