27:04 -0700 Local: Thurs,May 5 2005 2:27 pm Subject: HP JD Printer Installation Problems Help Reply | Reply to Author | Forward | Print | Individual Message | Show original | Remove | Report Abuse I have tried to add a HP LaserJet 4050 Network printer...

my printer (DeskJet340), it starts the installation, but > aborts the wizard stating "There was a problem installing this hardware. An > error occurred during the installation of this device. The data is invalid". > Can anyone help me how to resolve this?...

12. Follow the other steps of Kyocera Mita Printer Installation Wizard. 13. When the Confirm Settings page of the Kyocera Mita Printer Installation Wizard appers make sure that all settings are correct and click to start installation. HELP!! Thanks.....

the installation and this did not help. If I run a print job through an application the application shuts down. Archived from groups: microsoft.public.windowsxp.print_fax () Can the PC 'see' the network PCs fine? Is the network printer on a print server...

the install software. This does not work. Any suggestions on how to install. Your help greatly appreciated.. Archived from groups: comp.sys.hp.hardware () I have a HP Photosmart 7350 printer that I am trying to install on a Dell 4300 computer running...

that I used the downloaded Lexmark driver it always tries to use that file setup for that printer -- so I get an install that ends with the connection error and no printer gets installed). Any help would be appreciated. Archived from groups:...

She couldn't get the printer to install. >> Then I helped her install it, following the instructions at the HP site > entitled "HP Deskjet Printers - Installing the Printer with the Driver > Included in Microsoft(R) Windows XP". This time, the installation...

She couldn't get the printer to install. >> Then I helped her install it, following the instructions at the HP site > entitled "HP Deskjet Printers - Installing the Printer with the Driver > Included in Microsoft(R) Windows XP". This time, the installation...

physically take the printer to the NT > 4.0 server and install it there out of the LPT1 port with > the NT driver? >> Pete.. Physically install the printer to the LPT port of the XP machine. Install all drivers and do a test page. Move the printer...

hp 845c install" help please. Archived from groups: comp.periphs.printers,comp.sys.hp.hardware,comp.sys.hp.misc () having big problems after a format & fresh reinstall of win 98se getting this printer to install.... win98 recognises the printer as soon...