a cut sheet or simply flipping over the sheet to print on the > other half? I have the 4000 and love it. In photohop: You can easily place small prints on any portion of the paper, feeding it through multiple times and specifying a different part of...

bought it secondhand so I don't know how old it is. It prints fine, but the problem is paper feed. I draw in AutoCad and plot on A2 cut sheets, 100g/m2. The sheet picks up okay, but frequently passes straight through, as if it's doing a 'form feed'. What...

big deal >> -"gloss" optimizer >needed for Epson ink >> - 13" wide print capability, vs. only 8.5" for the Canon >always good for an A3 printer>> - 44" long print capability, vs. only 11" for the Canon >Canon will do 23" >> - 5760 nozzles, vs. 6144...

pass slowly through. I did it several times. So far OK. No, there was no significant change in the way the printer handles paper: no photo papers can be used. The printer feeds the paper 2-3 inches, starts printing, but from now on the paper does not...

In the office where I work I despair at the amount of paper wasted from printer mess-ups where paper comes out blank or has just a tiny amount of print on them so I thought I could save waste by re-inserting this paper back into the laser printer but...

printer(s) which does not clog as the old model does. If so, please recommend me the model number. I wish to go back to Epson printer. Craig. Archived from groups: comp.periphs.printers () I loved Epson color printers. They print beautiful pictures....

it likes to leave marks on papers during printing and paper feeds> so I have to clean them. It is very annoying! Also, it is difficult to do > intense movements (e.g., remove pieces in printer) due to my multiple > physical disabilities to clean the printer....

then starts to feed but then stops, does not feed through completely, printer continues to print even though paper not feeding. . lexmark x6170 printer: pulls paper to the right, then starts to feed but then stops, does not feed through completely, printer...

Printer sometimes does not print, paper just feed through.... Archived from groups: comp.periphs.printers () I have a very situation here. Sometimes, the printer does not print and the paper just feed through. I'm using the same application and printer...

is > the adjustment you are asking about it will not affect placement of the text > on the paper. I don't know if this printer has another alignment utility to > adjust the printed image on the paper additional to the usual print head > alignment utility...