I have problem with my Ethernet card/XP. Yesterday I bought an Acorp 10/100Mbps Fast Ethernet Adapter I installed it into a PCI slot. BUT the XP not said "a new hardware found"... I try to install the drivers manualy but there aren't any XP drivers on the disk...

I have problem with Ethernet Card/XP. Yesterday I bought an Acorp 10/100Mbps Fast Ethernet Adapter I installed it into a PCI slot. BUT the XP not said "a new hardware found"... I try to install the drivers manualy but there aren't any XP drivers on the disk...

Win Millenium, Linux and Win XP it doesnt work...does anyone can help me? thanks Norbert. hi! i have a problem,...my ethernet card is not working,... The problem did not occur when I had old motherboard (KA 6100), it was OK. When I upgraded (I bought second...

ethernet card not working. hi! i have a problem,...my ethernet card is not working,... The problem did not occur when I had old motherboard (KA 6100), it was OK. When I upgraded (I bought second harddisk and changed motherboard to BX Master5.1), it stopped...

I buy to work with DSL for century-tel - my computer didn't have an ethernet card on it thanks! Pam Archived from groups: microsoft.public.windowsxp.customize () you should not have a problem with ethernet card. I know of no problem with nic cards....

that is messing up your sound. Or maybe it's two separate problems -- the ethernet port going bad on its own, and interference from another source (like the power cables in your case) causing the sound problems. You DO have a sound card -- virtually all...

I have problems with my ethernet card/XP. Yesterday I bought an Acorp 10/100Mbps Fast Ethernet Adapter I installed it into a PCI slot. BUT the XP not said "a new hardware found"... I try to install the drivers manualy but there aren't any XP drivers on the...

with an ethernet connection to the laptop and wireless card disabled in order to test the AP1-AP2 link, but still nothing. The strange think I saw was that my ethernet card was sending only, not receiving! Clearly a problem in AP1-AP2 link. Also, when...

suggests strongly to me that the two buildings have different electrical feeds. If so, then if you were to connect them by any kind of electricity carrying cable, you could run into substantial problems with ground differentials, and could end up frying...

when my computer starts. 2. Start > Control Panel > Network Connections > delete ethernet connection Start > Control Panel > Network Connections > delete internet connection Start > Control Panel > Network Connections > create new ethernet connection...