long shot, could you try booting up with the problem keyboard and *without* your mouse? I vaguely remember reading something about someone's keyboard not being detected when the mouse was plugged in. Other than that I wonder if if could be an IRQ problem...

the keyboard, departing from the old standard IC. Two suggestions: Try a PS/2-to-USB adapter and plug in the IBM keyboard that way. Let me know if it works. The days of the PS/2 "legacy" keyboard connector are numbered. Try a newer IBM keyboard....

using now (saitek gaming keyboard) is just as good as my first one was when playing the first Unreal on my Voodoo 3 and 500MHz P2. If your going to spend that much money on a gaming keyboard you should consider this, in combination with a regular keyboard....

I get a message saying "keyboard not detected. Turn off keyboard lock" at POST. How do I "unlock" the keyboard? The latest error is "Keyboard not detected. Keyboard failure." I checked my keyboard on a second PC and the problem is not the keyboard. "Error....

Vectra", etc.), I could not find anything, but you probably can, because you have that kind of information. Archived from groups: comp.sys.hp.hardware () I have checked on website My problem is I have this keyboard, but the keyboard can install with any...

try to determine if the problem is keyboard or keyboard controller. Trying a keyboard known to be good on problem machine. Also try troublesome keyboard on another system. -- Sharon F MS-MVP ~ Windows Shell/User Archived from groups:...

mouse and keyboard, and the keyboard works in the BIOS just fine. Any help would be greatlly appreciated. Is there any way that i can restore the old motherboard drivers? Same problem... No Keyboard or mouse after upgrading MB drivers. Neither USB or PS2...

I am able to press F12 to get to the boot menu, but once I am there the keyboard doesn't work. I've tried it with both my keyboard and my sister's keyboard. Her keyboard will light up, so it's definitely getting power. I've also tried all my USB slots. The...

a new keyboard) and I'm curious how, in case it happens to me again. Jim On Mon, 1 Aug 2005 20:32:17 -0500, "Carey Frisch [MVP]" wrote: >Replace your damaged or defective keyboard.... my keyboard is not working properly. The "." keeps becoming...

in the array. This is not a driver issue. The driver has nothing to do with how the keyboard array is scanned. The driver only interprets the commands from the keyboard. It the keyboard itself thats incapable of resolving multiple simultaneous keypresses....