Problems Overclocking. I have having radom reboots after I tried overclocking my computer. It was working fine for a couple of days with several hours of Prime95 stability, but I then tried running memtest86 for stability and ran into a few problems. I worked...

Problem overclocking my qx9650. Hi. Recently bought a qx9650, lapped it and installed it. Runs fine at stock. I was trying to oc it to 3.6 by upping the fsb to 400 (x9), but everything keeps crashing. No matter what settings I use (voltage, timings, DRAM:...

Problem with overclocking core i7 920. Guys i really need ur help in this area..... I use a Core i7 920 C0 revision at 3.5 ghz ....anything over this will either giv me a bsod :fou: or will hang up when i do a stress test or a 3d vantage .... It really...

Problem overclocking amd 720. Im new to overclocking and am having problems. I went into the bios changed the cpu frequency to several different options such as x12.5 2500 mhz and when i save it and the pc goes to restart it does not restart and I have to reset...

you have any major or minor problems when overclocking (stable, errors that can't be fixed, restart for no reasons)?. In general terms of overclocking the cpu and graphics card and the ram, which of these motherboards will perform best? Give a rating of 10...

I7 920 + ram problems overclocking?. I'm overclocking my i7 920 and anytime i take the processor above 3.3ghz no matter the ram settings no matter how much voltage and how low the speed is on the ram i cant even pass the windows memory test before i boot into...

Problem overclocking x1900 Crossifre?. I have an x1900xtx, x1900crossfire with an a8r32mvp. When I use the CCC to overclock my cards my system will freeze during 3dmark06. I have tried pushing it up a little at a time, also tried using the automated overclock...

Problem when overclocking 800 to 1066 P4T533-C. I am having trouble overclocking my Asus P4T533-C, 2.53 P4 with 4 PC800 256MB 184-pin Samsung memory, 800-40, MR16R1628DF0-CM8. Evertime I change my RDRAM/FSB frequency from Auto to 4 my computer will only...

a fully working product without... problems. :p True :P But Overclocking isnt rly allowed :). Anyway i have same problems with 2 8800GT's I have changed this card few days ago reason was i thought its not working well. But problem was in my motherboard...

to start overclocking. We turned it off and took out the video card to put in a VF-700CU. Put it back, and no post. Gave the BIOS 8 hours to clear...still just annoying ass beeps. well, the problem is, you don't have an overclocking expert there, like me...