I presume this problem has something to do with the router rather than zonealarm. I use another VoIP program (echolink) which works fine but I had to set port forwarding on the modem and also in zonealarm - if this needs to be done for messenger does...

I have Port forwarded, firewall disabled, etc. I know i have to forward ports 6112-6119, but the ip address part is sketchy. Im no sure which ip to use. I tried forwarded my modem and router using multiple ip addresses from my computer, and none worked. Any...

address may be needed for additional server functions and port forwarding from the modem. Assign an address in the range the modem/router is using. You only need to change the last group of numbers. Example - 192.168.1.xxx If you wish to use DHCP assigned...

with a static IP. I've tried forwarding the modem directly to the computer.. I'm relatively new to port forwarding. I use to have a cable modem, and I set up port forwarding on my wireless router so I could use my desktop computer as a server. I have since...

failing (doh! :redface: ). I'm aware of the problems with port forwarding if you're not using a fixed IP.... Had exactly that with a customer the other day in fact. He has other problems now, with the modem repeatedly dropping the connection, but ah...

I have a problem with the port forwarding page in the setup for the dlink dsl g604T adsl modem router. I can use other pages on the 10.1.1.1 site - for the router - but cannot use the advanced - port forwarding page. I doubt if i am the only one who...

button for 10 sec. (manual ref 2.1.2.1) The modem has a auto config firmware. Just by entering should lanuch it. This modem has a full firewall and router functions, including port forwarding. I still can't access it using any of the methods mentioned...

Web, FTP Hosting and Port Forwarding. Hello, I have a rather simple problem. I cannot forward any ports through my modem/router to any computer on my lan. I have been able to do this in that passed. But I changed to a static IP through my ISP and my wireless...

up. They sent me a Siemens Speedstream 4100 modem. I have a Linksys BEFSR41 router (wired only, 4 port ethernet). Now I can't get the router to recognize the modem. On the front of the router are LEDs for each ethernet port and the WAN port. The LINK...

the firewall on the router. Don't put the server on DMZ. My server works just fine with a persistent port forwarding on port 80. If the server is plugged directly to the modem (without the router) can it be accessed from the WAN? Some ISPs block...