reboots prior to POST when set at the RAM's profile setting? What happens when you switch to XMP for 1333Mhz? Do you get the same problem? What voltage does the ram get set to when you are trying to use XMP @ 1600? and what voltage is your memory rate for...

was eventually just blind luck. as you said, the problem was voltage related. i've never overclocked or anything so i'd never gone near voltage settings. i eventually got there and saw my ram was getting 1.5 instead of 1.9 and that solved the problem. newest...

Sony. Cameras are designed to operate over a particular voltage range. They aren't designed to use the battery's internal resistance to limit the current. I'm quite sure that AA lithium batteries that provide slightly lower voltage (whether by pre-using...

on: I had a similar issue when I started overclocking. I know that you aren't overclocking your machine but the cause could be the same. For me, the problem was that my RAM was not getting enough voltage. My motherboard's default voltage was too low and...

to manually tone this back to the 1600 range) CPU Voltage: 1.33125 (When left at stock, system would post but prime would BSOD after 5 minutes. Increased this and just matched the settings for QPI/DRAM Core Voltage) CPU PPL Voltage: 1.80 QPI/DRAM Core Voltage:...

9550 card. Well the problem didnt go away, and the problem started to get worse, even once i got my radeon 9800 pro back the problem still occured. THe computer would frezze up when i tried to run a program, play a game and even started to frezze when i just...

relation. He also says that changing the Voltage will not change the resistance [yes, true], and vise/versa [only true with Applied Voltage], and that this is why there is no relation. My argument is mathematical, and I would love to hear any sides of this....

low frequency roll off. Perhaps a better way to say it is that output voltage is related linearly to displacement in condenser mics and to velocity in dynamic mics. So, linear translation of pressure into voltage occurs for condenser mics with their mass/...

which you'll easily get an open loop gain of around >4000 with a transistor operating off 250V. It's kinda necessary to use >feedback to tame the gain. This is a major irritation to my mind, and you can hardly even _get_ small signal semis at that voltage....

Sony Cybershot DSC-W1... Bad Camera...Bad Customer Service... Archived from groups: alt.comp.periphs.dcameras,alt.photography,japan.photo.camera,rec.photo.digital,rec.photo.equipment.35mm () I bought a Sony Cybershot DSC-W1 the other day. I tested it out,...