k7s5a's in service. 0 problems. I had a k7vta3 that was total crap... and a k7vta r3(revision3) that was fine woo I can double post.. not sure how that happened i have an ECS board. and the only problems i have so far with it is the 95 watt cpu limit on...

set in BIOS to EPP and seen like that under Win). Now I have an K7VTA3 mainboard with WinXP. My problem is connected with drivers for this scanner. Earlier I had no problems with scanner and now i can't find the right drivers for it. My XP says that my LPT...

2 or 3 minutes or so. The same goes while watching DVD's with PowerDVD. I've got an Athlon XP 1700+, 256MB DDR, SB Audigy, TNT2 Ultra, and a ATA100 drive on a ECS K7VTA3 rev2. I definately shouldn't be having performance problems. I've updated to the latest...

Problems with installing new hard drive controller. Archived from groups: microsoft.public.windowsxp.perform_maintain () Previous Configuration: ECS K7VTA3 8.0 motherboard (Socket A or 462, can't remember) AMD Athlon XP 1 512mb SDRAM Card (PC2100) 1 256mb...

Gigabyte VRXP board + athlon 1700. Little Computer: ECS K7VTA3 V3.X + athlon 1600. HELP !!! Cheers. Try pinging 127.0.0.1 from problem PC. If no go, then uninstall and re-install TCP/IP protocols. ~ My System Specs ~ :wink: ...

k7vta3. Thanks for any input John A It could be the mobo ... again. It could also be the power supply. It's all relative... Could be the motherboard, not likely. Could be power-most likely. In the middle are configuration problems, like using the...

My 56K modem is only connecting at 28.8!. I just built a new system. ECS K7VTA3 mb, Micron 256bm, Maxtor ATA133 40bg, SB Live! Value, LiteOn24X, Epson C80, ATI Rage 128 2000, Antec SX630. Actiontec PCI V.92 V.44 Call waiting Modem (controller based - new...

background. Using Outlook, sending mail and trying to do something else, I am at 100% cpu. Usually, this results in a lockup....what gives? Next step for this thing is........out the window! 1.4GHz, 512DDR, geoforce 2 MX200, ECS K7vta3, WD 7200HDD This...

some of your programs but I would recomend a full install which will cause you less problems in the long run, check this link for repair install instructions :- Hope this helps Tony Hmm yeah that's the vibe i've been getting from googling the problem,...

I have done nothing to tweak my existing one. I have to admit I didn't even know it was possible. Can anyone give me some advice as to how this is done. As background, I have an ecs k7vta3 v1 mobo, 1.4ghz t-bird, 40mb ibm 7200rpm drive, 512 pc2100 memory,...