xfire symbol too when you play just to check. If you don't see it in the upper right corner then it isn't working. If you see it then it is working. Do you get xfire in other games or is it just WOW? You don't run xfire in different modes BTW. I am...

while trying to play? I know I had some major issues with frames and when I tried the game with X-fire turned off my frames shot back up. Just a thought though hope you figure it out. I had that same problem. i am running absolutely nothing in the backround,...

sale I'll get a 5870 or 5890 if they're out yet. WoW wait a minute since when do both cards need to be from the same manufacturer to run xfire? Have you got any link to prove that? As far as I know you can even let a 4890 run xfire together with a 4870 (the...

HD5870 X-Fire. Hi guys a friend of mine has got himself two 5870s to run in xfire he has a huge monitor and AMD965, DDR3 ram.. a very nice setup. Now the problem is that he cannot get the X-Fire to run properly.. when he tests them on, for example crysis...

I thought it was a heat problem but after I ruled that out I ran ASUS probe and kept the voltage monitor active started crysis. Gaming with Xfire draws alot of power and even though my PSU was 700 watts the 12v rail couldnt handle my 4850's running in Xfire....

already. Your PSU should be ok to run xfire. I am running two 4870s off a 650W PSU. Unless there is a problem with your PSU, I would think 620W would be ok. I found that the only BIOS setting that affects xfire is setting your PCIe frequency manually....

w5/qwerqwer_06/8AA.jpg Unless you are running fairly low settings there is just no way.That's with softshadows right? With softshadows I'm getting close to those numbers, although I haven't overclocked my card yet. I belive this is about driver problems...

remember it will not work as well if ur using something like amd fusion, it will shut down some of the resources that u need to run those x-fire graphicscard at there peek,go ahead use fusion, amd overdrive, and run in x-fire, then disable 'em and auto clock...

I had to leave that on auto or else it wouldn't run xfire on my system. Also make sure that in CCC you have the Catalyst A.I. enabled. You won't run xfire with it unchecked. Perhaps there is a bug there and it just freezes if it isn't checked. Who knows....

the other day that just popped a grand for a Blu Ray. If I was in need of dropping a grand, I'd probably spend it on two 1950s or an X6800 before a single Blu Ray. Yikes! Alas, I do not have that problem... Still, I'm interested in seeing how you might...