ProCurve] Time Settings. Archived from groups: comp.sys.hp.hardware () Hi Group, on a ProCurve Switch we get different timestamps. Once in a telnet session the time command brings an output which is totaly wrong and the output from the webinterface seems...

or even Dell. For a 100-user network with little or no VLANing what is the advantage of Cisco's hardware? Are there any vendors to avoid? Finally, any specific suggestions or warnings about the HP Procurve 4100? Thanks.. Archived from groups:...

I tried port trunking when configuring dual 100 NICS on the terminal server, but saw no readily apparent benefit. HP Procurve has told me different stories each time I've called them. 3) Will this scenario actually give me noticeable improvements? I...

Need help with ProCurve 5308XL ACL. Archived from groups: comp.sys.hp.hardware () Hi, we´ve got a ProCurve5308xl switch in our network and we are not really experienced in configuring VLANs and ACLs. Unfortunally this switch is already working in productive...

would sit inline on the PC ethernet link and when it lost power would break the link. Do you know of such a device? Thanks again- Rich PS I'm using the groups.google interface for the first time. Apologies if it does anything rude like top post...

it on one of your machines that is experiencing the slowdown and watch the traffic and see if it's sending anything for which it is not getting a response or receiving anything to which it should be responding and isn't. With those tools and some time...

we tried them on // off with no noticable difference) So i guess it must have been the pcs or network card settings or somthing, just totaly unsure why :S (all Network ports everwhere were set to 100FD or gigFD where they could be) Maybe the machines...

120 Hosts Running GigE at Wire Speed Minimum Cost. Archived from groups: comp.dcom.lans.ethernet () What is the minimum cost solution for running 120 hosts at wire speed on GigE? I am thinking that something like two used Foundry or Extreme switches would...

either all tagged or all untagged. Mixing makes it confusing. >>>(That's sort of the whole point of VLANS) >>> Sort of. Well, yes, sort of. It's one of the more common uses. Before I had a layer 3 switch I did that all the time - on a 24...