settings to be stable on 2.6Ghz are: FSB: 1156 Memory: 800Mhz cpu ratio: 9x Vcore: 1.2v (default) RamV: 2.1 VTT: 1.275 NB: 1.24 (default) SB: 1.5 (default) Mem time: (4-4-4-15) 1T/2T: Auto. cpu: Q6600 G0 stepping MoBo: MSI p7n platinum Ram:...

should be rite. hey i was having similar problems with my gtx260 and q6600 and i dont think its ur motherboard. ur cpu is probably bottlenecking ur card so try overclocking beyond 3ghz+ and u should be rite. the q6600 isnt stable when running at stock with...

orb thing way too far...how many "orb" coolers do they have these days? -_- Currently using the Orb with Q6600. Temperatures are good up to 3ghz, but anything over and full load temps are reaching 70's. I'm also using a Blue Orb to colly m7 G0 Q6600, its stable...

speed of up to 533Mhz for an overall clock speed of 4.797Ghz on a Q6600. It will not be stable at those speeds anyway. DDR2-800 at 800Mhz allows for FSB of up to 400Mhz at 1:1, providing a Q6600 at speeds of 3.6Ghz which is probably more then you could need...

OCed Q6600/8800GT (Stable). Hi guys, after much thought, and a lot of practice on spare parts (placing AS5 on a spare junk 7600gt to make sure I am using the proper amount etc), I finally completed my project: XFX 750i SLI Mainboard 8gb OCZ Gold Edition...

run a stress test. If you remain stable continue uping the fsb until you fail a stbility test or blue screen; then bumb the Vcore by .01 of a volt (if permited by mobo) until you are stable. Continue this process until you reach your desired overclock. I wouldnt...

Q6600 Thermal Paste Help + Overclocking. Hi Guys I've been having some trouble getting my thermal paste on correctly. I had earlier tried overclocking by Q6600 and was getting very high temperatures and an 8C differance between Cores 0 and 1 and 2 and 3....

based on your FSB. If your RAM is being auto configured to a setting which it's not capable of running stable, that could also be causing your system reboots. The Q6600 G0 is deemed by many to be capable of up to 3.6Ghz on systems with very good Air cooling...

Q6600 vs. Q9550. Hey folks, been reading these forums for years but this is the first time I have posted. I just got done upgrading my rig and I have a couple of questions, let me start by listing my stats. [b] 750i EVGA mobo Q6600 cpu (stable at 3.0)...

q6600. Crysis and UT3 results are pretty much clear - small loss for q6600 at stock. Everything what is needed to do with old good q6600 - decent overclock. I don’t know dude...look at this q6600 at 3.3 stable, maybe try it at first with only...