the required VID was out of spec for the QX6800 and core 0 generated too much heat. The tester dropped back to Q6700 and now the VID falls in the high end of the tolerance for a Q6700, but core 0 still generates too much heat. So the tester drops back to...

normal. Under load I get up to 15c difference between cores on my Q6700. Core 0 and 1 do more work, therefore they run hotter. I'm using a Sunbeam core contact freezer with tx-2. .. i ve got the q6700 since more than 1 year.. and in this time the cpu have...

Card 1 x Corsair 4GB (2x2GB) DDR2 800MHz/PC2-6400 XMS2 DHX Memory Kit Non-ECC Unbuffered CL5 1 x Intel Core 2 Quad Q6700 2.66GHz Socket 775 1066MHz 8MB (2x4MB(4MB per core pair)) L2 Cache OEM Processor 1 x Black Multimedia Keyboard - USB/PS2 Connection...

true, but when running a single instance of Prim95, I get about 15-30% on each of the cores, instead of the required 100%. So, therefore, I activate four instances. That's when Core Temp reads insane values... Try O.C.C.T, use HWMonitor to monitor temps. ^ Thanks,...

Q6700 only 2 core temp showing. I have just installed a q6700 into my Abit - AW9D board. Have overclocked just a little to 3.2 But coretemp, real temp and speedfan only show temperatures for 2 cores Im running vista 64 is this possibly something to...

95degrees Celius. Ah well, winter is coming, i can at least use the PC as a room heater :lol: 95c LOL You need to do a reverse overclock,lol Back it off until the core temps under prime are at 70 or below Seriously, start manually setting voltages...

WHY SOME OF THESE READ DIFFERENT TEMPS! These first two will give you just the core temperatures (not system temps, voltages, etc.): (freeware) (freeware) The next three will give you core temps plus many other temps, voltages, fan RPMs, etc.: (freeware)...

Go with the SpeedFan temps. Those temps were calibrated according to the[/b] by CompuTronix ++ The CPU on that motherboard is a E2180. The CPU has been stress tested with Prime95. ...

one run (5 minutes) of Intel's Burn Test, my cores went 39->65, 35->62, 38->61, and 33->55. There is a huge difference between the core temps. I am using a CM HAF 932, CM V8, and Arctic Silver. It is possible I put on too much paste. I put it on both...