drives set-up in Raid 0+1 on the NVIDIA nForce 4 SLI MCP chipset, not the Silicon Image chipset. The motherboard died and I need to replace it. Do I need to find an identical raid controller or can the other raid controller detect my raid set-up and work...

to you want to do” screen, choose custom install. If Windows automatically detects your Raid controller you are good to go. If your RAID controller is not detected you will need to go to you motherboard manufacturers website and download the driver...

drive controller detection, and select S to specify additional drivers. Then later you'll be prompted to insert the manufacturer supplied Windows 2000 driver for your serial ATA controller in drive "A" When you get to the point, delete the existing NTFS...

Dell's OEM CD. I don't mind that, but I would really like to get Windows 2000 or XP Pro on the computer. After doing a bit of research, I found out I could put some SATA/RAID driver files on a floppy, and when the setup of the operating system begins,...

server has a hardware RAID controller. I am working with them to gather a log file and make sure there are no hardware problems before I upgrade the server. I imagine I will have to break this mirror(using their softaware for the RAID controller) then...

prevent drive controller detection, and select S to specify >additional drivers. Then later you'll be prompted to insert the manufacturer >supplied Windows 2000 driver for your raid controller in drive "A" >>If you wait and then S to specify additional...

it. Well i've done it, problem solved. I didn't have to reinstall everything. I plugged the drive into the Silicon controller and it detected it first time. It's a little worrying that Vista doesn't detect it when plugged into the other SATA's but at least...

controller detection, and select S to specify additional drivers. Then later you'll be prompted to insert the manufacturer supplied Windows 2000 driver for your raid controller in drive "A" -- Regards, Dave Patrick ....Please no email replies - reply...

at setup is inspecting your system) in the setup to prevent drive controller detection, and select S to specify additional drivers. Then later you'll be prompted to insert the manufacturer supplied Windows 2000 driver for your scsi or raid controller in...

raid controller in drive "A" If you wait and then S to specify additional drivers, then it may be too late as Windows 2000 Setup at this point may have already assigned the resources your drive's controller is wanting to use. When you get to the point,...