RAID or separate hard drive?. Currently I have 2 IBM 60gxp's in my PC. They have been stripped using the RAID controller that came with my Abit KG7 motherboard. The thing is that my PC isn't capturing video as fast or reliable as I hoped it would. I...

through a Linksys router or the sort? Are 1.5 TB hard drives good for RAID? I found that the Seagates may not be the best but is this true of all 1.5 TB hard drives? And I just read the sticky... APPROXIMATE PURCHASE DATE: Uh, as soon I get the go-ahead....

drives you want to RAID to a separate controller so that you can leave the drive that XP is installed on set to "IDE". A cheap add-in RAID board could do this. Switching from AHCI to RAID is easy as the RAID mode is a superset of AHCI and a quick driver swap...

are faster than any other PIII boards, tested it personally on a dozen or so high end units. I forgot about the RAID request, but he certainly could use a RAID card in it. Having the RAID on a separate card would reduce repair time consid...

two drive letters. >> david >>>>>>>>> Remember, your options on the 8400 are RAID 0 and RAID 1. Both involve two >separate hard disks, but RAID 0 (striping) writes the data across two disks > AS IF they were one. RAID 1 (mirroring) creates...

for the OS, then it will beat the pants off any hard drive for boot times and program loading. For most people the OS disk is the primary bottleneck and having data files on a separate hard drive is not a problem. But if you're manipulating large data files...

ok since writes can be alternated between two different hard drives. The first thing to do is to separate the input and output files on separate hard drives. That will minimize the seek time by keeping the read/write heads in about the same place. You...

what software is recommended for this? Thanks, so c and e are separate hard drives? if you so can raid 0 them. (I would recommend a backup schedule) otherwise you are looking at jbod which has the same cons as raid 0 but none of the advantages. Need...

years on this Hard disk with a raid 0 no problems. I just set up a dual booting system by adding Vista 64 on a separate hard drive. I change the raid from a raid 0 to a raid 1 using new drives before loading Vista.( Raid drivers were already loaded and...

be placed? Can it go on a flash drive as well, or a separate hard drive? How big should I make it on this system? 4gb largely eliminates the need to worry about the page file. The best place would be on a separate non raid hard drive, not a usb drive. I...