Not receiving all transponders. Archived from groups: alt.satellite.tv () I am having a problem with my DirecTV system; I am not receiving a signal on all transponders. The signal strength is excellent on all transponders I am receiving signal; there is...

not get some transponders with sufficient strength to get a good picture, usually around 30 to 35, while others were around 100. . I knew it was my receiver because another receiver got the transponders fine. Does the voltage show correctly for the...

that I am only using this receiver to pick up true FTA signals on C band. I have not attempted to upload new firmware or anything like that. 1) I assume that my receiver is not the only Pansat 2500A that ever occasionally says "no signal" on every transponder...

change >transponders as needed due to capacity issues. > If your dish is aimed properly at 101 degrees you will get at least 90 on > all the transponders you need to see. The local channels are on spot beams > so you receive only the locals for your area...

channels you automatically change transponders. Each transponder carries the signal for a station or group of stations. A signal strength of zero means you don't receive the signals from that transponder either due to your programming package and the type...

3 LNB Direct TV dish and receive strong signals (97+) on all 32 transponders for the A satellite (101) and receive strong signals for transponders 8, 10, and 12 for Satellite C (110) but no signal at all on sat B (119). I don't know what I'm missing since...

results. No signal from transponders 17-32. Hooked up an old RCA 4th gen receiver I hate to confirm it wasn't a problem with my Tivo receiver and still no signal on the top transponders. I'm at a loss as to what could be the problem here?. Archived from...

results. No signal from transponders 17-32. Hooked up an old RCA 4th gen receiver I hate to confirm it wasn't a problem with my Tivo receiver and still no signal on the top transponders. I'm at a loss as to what could be the problem here?. Archived from...

to multiple "channels" - Some transponders are "wide beam" - meaning they cover all of the US, and others are "spot beam" meaning they cover smaller regions (this is how many local channels are transmitted). So, your receiver may use multiple transponders...