Remote Desktop Port Forwarding. Archived from groups: microsoft.public.broadbandnet.hardware () I am using the Microsoft MN-500 wireless router, and the 510 Wireless USB connector. I would like to set up a remote desktop, but I am only able to connect...

been attempting to forward the requests that come to the router from my remote machine to a specific port (using the applications & gaming PORT RANGE FORWARD) feature on the console of the router. What is the correct port to use for remote desktop? Archived...

ICS and remote desktop port changing. Archived from groups: microsoft.public.windowsxp.work_remotely () Ok my story is kind of complicated. Basically I have two computer where computer1 is connected to the internet and allows ICS (internet connection...

due to the office policy, i only allow to change the remote desktop port to 80 in order to access, and it works fine with standalone remote desktop client, however when i try to set up a web connection so that i can access through web page, the problem came...

it forwards to your home system sitting patiently behind the router? In other words... WORK PC sends a request to HOME ROUTER IP:3389 (3389 is the default Remote Desktop port) by ways of a Remote Desktop Client. The HOME ROUTER sees this request...

connection and specifically allow the Remote Desktop service yet every time I try to connect to my home PC using a Remote Desktop connection the connection attempt fails. I've also confirmed with my ISP that port 3389 is not blocked in any way. Does...

forms of Remote Assistance invitation, but it has nothing to do with Remote Desktop. So--if you connect from a given location and connection type, using a VPN, to this same router, the VPN connects and you are then able to use Remote Desktop just fine?...

Remote Desktop problems. Archived from groups: microsoft.public.windowsxp.work_remotely,microsoft.public.windowsxp.hardware,microsoft.public.windowsxp.general,microsoft.public.windowsxp.help_and_support () I've never been able to get Remote Desktop to work....

Remote Desktop Assistant to work. I am on a flat LAN network and I believe my flat mates router has the ports blocked for incoming. What are all the Remote Desktop ports I need to open so that everything runs smoothly. Plus am I correct that the default/...

from any version of Remote Desktop. Port forwarding and NAT is not an issue as I dont use either. No matter if I try to connect from a Vista PC on the 10.x.x.x side or an XP PC from the internet side, I get a "could not connect to the remote computer error"....