How i set up an access point in repeater mode. hi i need help in my task that i have to set up which is set up an access point in repeater mode i want to know what is that , how it work and how i can set up .... . hi i need help in my task that...

but weak signal means low bandwidth.. I have a wap54g in AP mode and a wap54g in repeater mode. Occasionally laptops lose connection to repeater, but can connect to AP. Tried different channels, misc. parameter changes. Anyone hear of this? Currently connected...

Using a Netgear WG602 in Repeater Mode (Please Help!). Archived from groups: alt.internet.wireless () In trying to increase the signal strength to a distant machine on our wireless network, we got another WG602 and have it set in repeater mode. It's plugged...

repeat wirelessly. They also don't work with extenders that use WDS. Linksys b repeater mode works only with Linksys hardware and some DLink/other vendor gear that uses the same chipset and firmware version. Linksys G repeater/extender gear uses WDS which...

need Repeater mode, nor Bridge mode. The problem is that > the documentation usually doesn't say which devices can handle > multiple MAC addresses - they usually only refer to a single client > device. Mmm.. isn't repeater mode the same thing as wireless...

WAP54G V1.1 in Repeater Mode. Archived from groups: alt.internet.wireless () Hi, I bought a WAP54G to use in repeater mode with a WRT54G. Now I realize I bought a WAP54G V1.1 , and the setup menu does not mention anything on a 'repeater mode' function ... and...

in Repeater mode? Linksys tech support does not seem to know much about this. I have a network with a WAP-11 (wireless access point) and I am trying to use another WAP-11 in Repeater Mode to boost the signal. I change the SSID and MAC address , but...

WRT54G with 2 WAP54G's in repeater mode?. Archived from groups: alt.internet.wireless () Hey, Does anyone know if the WRT54G will communicate with 2 WAP54's (as opposed to 1) if they're acting as repeaters? As mentioned in a previous post by I forget...

within a building, so as I understand it this ~ is what I'd have : ~ ~ AP1 - connects to wired network and operates in repeater mode to send ~ data to remote AP wirelessly ~ ~ AP2 - connects to AP1 wirelessly in repeater mode but also acts as AP ~ for...