drive is in "Non-Raid-Mode" and no errors or warnings at all -> [00b846] so, what is the problem? i dont know what to do... plz help... *cry* :/ thanks in advice, ic3 . Hi, i cannot re-add the 3rd drive to my raid 5...

you'll end up with one WD 250 GB bootable drive with Windows XP on it, a 4-disk (WD 320 GB blue) RAID0 array used mainly for reading data, and a Samsung 1TB backup drive. But to start you will only mount the boot drive and install to there, then add other drives...

hold OS and most programs) plus a separate RAID of SATA's when using the ASUS P6T, CPU: i7 920, w/Windows Vista? Now the details. I bought the Intel X25-M 80GB Solid State Drive to hold Windows Vista Ultimate 64-bit and most of my programs. With the SSD...

faster access times for less throughput... at least based on my experience with various drives and RAID setups. -mcg Thanx guys. Turns out I do have the 3.AAK firmware. Not knowing squat about hard drive performance I couldn't tell you if I'm having any...

temporary drive to the normal IDE controller. 3) Enter the RAID controller bios. Setup the RAID0 array with your preferred stripesize. 4) Install the OS on the temporary drive. 5) Boot on the temporary drive. When the OS is up and running, install the RAID...

and backbones. You won't transfer that much because your computer won't be able to process that much information. Let me explain it this way: I assume you transferred a fairly large file from computer A to computer B, hard drive to hard drive right? I'm...

installed all parts - was able to boot and install Microsoft Windows Vista Ultimate SP1 64-bit and do all the updates. Windows reconized all parts and saw the 8 GB of RAM and the EVGA video card. Did no OC'ing or RAID setup as I wanted to get all updates first....

to hardware raid because you can create a Raid 0 array for the OS and a Raid 5 for file server all on the same 5 drives. Also, you won't be able to go above 2TB total available space under 32bit windows and onboard raid. You would need 'carving' for anything...

would you setup your computer with 3 drives with best possible RAID and OS/Programs installed on one partition and other media files data on other. I heard if i install RAID 0, i would loose all the data when the drives dies so i wanna try to stay away from...

I would NEVER put my OS drive on a RAID array. NEVER. As I'm sure you've noticed, when (and not if) the driver gets corrupted, not only do you get to repair the array, but reload windows and ALL those programs as well. Also, while RAID 0/10 has wonderful...