prints with detail like that from film, you need between 250 and 300 pixels per inch (100 to 120 per cm.) You don't need that much resolution if the prints can't be viewed close-up, or if the nature of the image doesn't call for it.. Archived from groups:...

What Print resolution for Epson 760. Archived from groups: rec.photo.digital () Hi, I'm getting myself into some trouble trying to print some photo scans onto my Epson stylus 760. I'll scan a photo/negative etc at a high resolution so that there is...

for the print to look great, I am however interesting in what it take to get the sharpest print possible. I am going to limit the prints to ones that are output on the laser jet type printers, the printer that output digital files to photographic paper,...

AFAIK, most commercial printers have some "native" resolution at which > they print. (Probably 300 dpi) > No matter what resolution your sent image is, They will resample it to 300 > dpi before printing. Of course it's best to send as many original pixels...

of prints at higher resolution by picky photographers who do their own darkroom printing, and the comments were about the *photo*, not about any lack of resolution in the print. Doesn't mean you can *always* *rely* on lower resolution looking good....

max resolution of 1440 dpi. >> If I have a digital image of 2880 x 1500, it must only be 2 inches wide when >printed at highest res. >> 2. Why do they say that 300dpi gives a good quality photo print, if my >resolution was 2400 pixels wide, it would...

for a number of years, give the demo a try. I'm with Ed. Qimage puts out the finest prints I've ever seen, both with inkjets and laser-printers. -- stan Archived from groups: comp.periphs.printers () Standard 4 x 6 "drug store" quality prints are...

day, all I really need to know is what sies the resolution> will print good pictures for. I doubt anyone is going to analyse them with > a magnifying glass, they are just momentos of a lcoal event. > Nobody's going to moan about 7x5s at that resolution,...

than 6", that avoids crop loss. To provide a concrete example, the S5100's 4mp resolution is 2272x1704 pixels, which is a 4/3 ratio. If pictures taken at this resolution were printed on 6" wide paper, to keep from from losing any part of the image,...

b & w prints is to use black ink only. Jim Archived from groups: rec.photo.digital () > Set the printer to black ink only. It reduces the resolution of the >print but it's the only way. Epson may also have a grayscale ink kit, > though I'm sure you'd...