Reversed phase LPs or CDs.. Archived from groups: rec.audio.pro () Over some years of community broadcasting I have come across many cases of phase reversal of either the left or right channels of commercially recorded medium,LP or CD.Home made recordings...

yet I keep screwng with it at the house for months. There's a stereo acoustic guitar pass & I have those pretty wide L/R. Suddenly the guitars sounded out of phase so I reversed phase on one side & it seems right - how did this change if it did - or it's...

90 degree phase offset in CoolEdit. Archived from groups: rec.audio.misc,rec.audio.pro () Hi I am not very familiar with CoolEdit and I want to playback my voice (or any mp3 file) with a 90 degree phase offset between the 2 channels/speakers. It must...

stereo file in a wave >editor and then nudge one of the left or right tracks a few samples to >get it in phase? If you suspect one recording channel was wired backwards, you need to reverse the phase of that channel, not delay it. If you feel one mic...

overheads in mono and flip the phase to discover > which sounds better. In most cases I flip the phase> on both overheads > kevin > Not me - I have tried reversing the phase of the OH's, and didn't like the sound at all. And.... I would think that ALL...

into both analog input 1 and ADAT input 1 and recorded the results into two parallel mono wav files) which suggested otherwise. When I normalised both files to the same level with their RMS, reversed the phase of one file and mixed it with the other, the...

themselves. I dug out a recording and tried soloing just one overhead centered along with the snare track, reversed the phase of the overhead and sure enough it had more body and crack to it. Will bear in mind for these recordings. Thanks a lot to you...

will be out of phase with each other when they are combined together when 3-4ms apart. Solution Reverse the phase ON BOTH overheads. Try going back to some of your older recording and try this and while checking for phase problems, monitor all drum...