voltage to run my E8400 at max? If I try to overclock anymore, I get "hardware failure" in Prime95, which I assume is too low a voltage. If I get rounding error, that is the memory being unstable. Correct me if I am wrong. Just wondering what the "MAX"...

A rounding error is different then it returning the wrong value. It displays a different error message. Try reading more than a single post. Way to stay classy btw. I'll admit I'm not 100% positive, but I'm pretty sure all prime95 errors show up as a rounding...

it - and prolly now I never will lol. BTW, running Prime95 and checking the box to "Detect Rounding Errors" will probably catch more memory issues than any other diagnostic tool. No windows memory diagnostic runs outside of the operating system, so no task...

Error! Multiplied %f with %f and got %Lg\n", a, b, ans); fprintf(stderr, "Error margin is %f.\n", (ans/b)-a); return 0; } } printf("Performed %d iterations, got %d errors.\n", iterations, errors); return 0;...

Detect rounding errors" checked) for at least one hour, watching core temps. Let us know what happens. That will tell us about heat and provide another type of memory test. Download from: Thanks for the test. I tested my system and it come up with a hardware...

I am looking for a stable system at this time rather than OC. I am getting regular BSODs throughout the Windows install process and boot process after the install. I have swapped out memory and video card but the problem continues. I tried setting CPU Enhanced...

Memtest doesn't catch all memory errors, but if you can run Prime95 for a couple hours on all threads (with "Detect rounding errors checked") without melting down or failing, you're good to go. But do not do this unattended until you a...

running All video and audio onboard I got this though [Tue Oct 06 14:58:12 2009] FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. [Tue Oct 06 15:03:20 2009] FATAL ERROR: Rounding was 0.5,...

getting errors and crashes even with the multiplier set at 6 and memory unlinked at 600 on auto settings so im confused a bit... what does memory unlinked and auto mean? like for me for instance i have mine set at 400(9ish) or i can choose 200(???) or...

files, virus, malware, check event log it might give You some clues. Sounds like it could be a memory or power supply issue...try running MemTest86 on your memory and see if you get any errors. I'm assuming all your temps etc. are ok? Since it eventually works...