AP/router for about $50, but a G bridge is still $100-150. I can almost get a pair of WDS-capable AP/routers instead of extending an existing router with a bridge. yuki. Archived from groups: alt.internet.wireless () I can find a Super-G AP/router for...

Using router as a bridge. Here is what I have. 3com dsl modem wired to Linksys WRT54g router/ap. Pc1 using ICS on the pc. Thats all cool. Works fine. Now...

Here is the equipment I have: Motorola Router NetGear Wireless Router hooked to it ALL DOWNSTAIRS I have an old Verizon DSL Wireless Router that has four open ethernet ports on the back. Is there anyway to use this router as a bridge to my internet connection...

MN-610 and Bridge Mode. Archived from groups: microsoft.public.broadbandnet.hardware () Hi, I have a 11Mbps wireless MS router and what I am planning on doing is purchasing a hugely better wired router (for work purposes) and just using the MS Router...

up to use > the second or third router as an Access Point. My > question is now, where is the bridge, if you have to > connect the second or third router in bridge mode to the > original router? Where and how do you place a bridge> ansent a wired connection,...

what capabilities must my router/bridge and his router/bridge have to allow me to connect in this relationship? infrastructure/adhoc mode? Do I have to buy my landlord a dedicated wireless bridge unit to do this?. Archived from groups: alt.comp.networking.connectivity...

to create the bridge. Bridging is built into XP. Right click both interfaces and click bridge. That's it. Having said that, it is a poor choice. Buy a dedicated bridge. Preferably WDS capable if your router/AP supports WDS. ...

model > D-Link trasnparent bridge(s) as they were intended to be used. Since > it's a bridge, not a router, the bridges know NOTHING about IP > addresses and such. Just make sure that broadcast traffic is enabled > to pass across the bridge. If not,...

a wireless router as a bridge on an existing wireless network? Am I missing something obvious?. Archived from groups: alt.internet.wireless () I recently purchased a MR814Rev2 router (it was $9 post-rebate...) thinking that I might be able to integrate...

router. I am looking to connect three ethernet devices to my network using one wireless bridge and a switch. <ascii art> +--device1 wireless air wireless | router ~ ~ ~ ~ ~ ~ bridge ---switch---...