Router and Switch Question. I am using a linksys SRW2024P switch to connect home automation components together, basically so they can comunicate. I am using a Dlink WBR2310 as my router. The problem I'm having is the components are not talking to one another....

the data in a blanket of tcp/ip, then unwraps it when it gets to its destination. cool...... as far as the router and switch question - a switch or hub wont achieve the same result because the switch or hub cannot be assigned an IP number. switches and hubs...

the connection, configuration of router&switch Do i need to configure the switch&question(DSL) about staich ip & PPPoE. iwant to build a net/gaming cafe i know all i need switch,router DSL please help me about the connection, configuration of router...

more pc's and a server. The QB server will be a 64bit dell Quad core machine with 6gb of ram and a 500gb hard drive. Not raided. My router is a linksys gigabit switch. My question is, will installing Windows server 2008 increase the speed of Quickbooks...

VPN/router/switch/NAT questions.... Archived from groups: comp.dcom.lans.ethernet () I have a few question for the guru's out there. Any help would be appreciated. I'm currently running my office network as follows: DSL modem/router -> 12-port switch...

like the topology to be: Internet --> Cable/DSL Modem -->Router --> 16 port switch --> 5 PCs + 2 laptops via wifi on the router. We may also add a media server to the switch at some point. My question (finally!) is whether or not it would be possible...

at one switch. This switch has igmp query and snooping function and no multicast routing protocol. I disable query and enable snooping because server and client connect same switch same vlan. But media client can not get media server stream. I think it...

A router is for security, right? I do not want an open connection to the internet, I really do want to have a router. So my question is... What's the difference between a switch and a router? Can you get the security of a router with a switch? If not,...

router,(should be labeled somewhere on it as to actually what it is), then all you need to do, is change the current setup to: Phoneline to Modem( if modem is actually a router) to Switch to All the computers, under those circumstances all you'll need to buy...

it says (sample transfer times) so i'm guessing they are not. what i want is your average sustained MB/s transfer rate from 1 computer in your home network, to another computer using a huge file. i don't think you did 100MB/s using a router, switch, or hub....