4328 search results for sata drive seek times
OK
Ad
  • SATA vs. IDE - Forum

    SATA vs. IDE. Archived from groups: microsoft.public.windowsxp.hardware () Are the current SATA drives really faster than IDE drives today? I do a lot of video editing and was considering adding a SATA drive for my video.. Archived from groups:...

  • Highest MB/s transfer rate on a home LAN? - Forum

    B, it tends to be faster if you're logged on and doing the operation from machine A. dude are those transfer times Real World situations? i calculated each one and they are perfect, in real world situations those times would be mixed and match. but i do see...

  • SAS or SATA for new file server - please advise - Forum

    me if I'm wrong. I understand SCSI drives have lower seek times and tend to be more reliable, but does it matter for a file server? Another factor is # of drives. For the new server I need 2TB total space - which is easy to do with SATA (4 x 1TB drives...

  • GA-EP45-UD3R Rev 1.1 slow HD access times - Forum

    90-100MB/s), but terrible access times. The PROBLEM is that the hard drive access time is always been 25-35ms....rather than the 15ms times where it should be. I've moved this hard drive over to another computer and have tested with HDTune there as well...

  • Partitioning Question - Forum

    disk and the middle/end etc; because the partitions force the drive to seek so far; while with just one big partition it would have less seek times. Generally do what makes sense, just don't overdo it. :) And remember any HDD is slow when comparing to an...

  • Maxtor announces nearline SATA II harddrive with up to 300 GByte - News

    offer respectable performance. According to the specs released by Maxtor, the average seek time of the drives is about 9.3 ms. The devices support SATA II which includes native command queuing (NCQ) to enable multi-threaded performance and allowing the drive...

  • Samsung Spinpoint F, RAID, EcoGreen - Reviews

    memory. All Spinpoint F models are based on Serial ATA/300 interfaces and include Native Command Queuing (NQC). The drive’s seek time isn’t exciting, but the drive provides solid application performance and high throughput. Business: Samsung Spinpoint...

  • Is it a good time to upgrade my 3000+ to a 4400+ dual core? - Forum

    to dual cores. Most of your bottleneck is in your drives. You would also probably benefit more from a raid0 setup. well I already sold my 3000+ , and I have been using a single 80gig sata drive , so now looking to buy new cpu. I am using a 478 2,4gh...

  • SAS Hard Drives - Reviews

    Fujitsu's current high-performance professional hard drive family. It spins at 15,000 RPM and offers capacity points of 36 GB, 74 GB and 147 GB. Fujitsu says its read seek times are 3.3 ms and write seeks are 3.8 ms. All drives carry 16 MB buffer memory and...

Ad