- Related Search
- molex connectors
- SATA in non-RAID
- PSUNameModel rveiew
- By relevance
- By date |
- Sort :
-
Computer over current question
- Forum
Thermaltake is very expensive, and i have too many molex and sata power connectors, and i have plenty of PCI-e power connectors as well. Also my power supply is an 80 plus. It is thermlatake toughpower, the GTS 250 only asks for a 500 watt power supply minimum....
-
Dangling wires bothering me
- Forum
and one 150 watt, 8-pin PCI Express® power connectors 850 Watt power supply with two 75 watt 6-pin, and two 150 watt, 8-pin, PCI Express connectors for ATI CrossFireX™ technology in dual mode The power supply recommendations are for an entire pc system....
-
Anyone use newegg?
- Forum
ago when I received a WD Raptor hard drive that had been shipped with no packaging material, rolling around in a box. The molex connector on the drive was damaged, (broken plastic) meaning that only the SATA power connector worked. I never received anything...
-
Micro Sata to Sata.
- Forum
These are very common now. SATA power supplies provide the 3.3v and 5.5v so all we needed to do was wire the adapter correctly. This will work with any SATA power supply and will be the most cost effective solution to this problem when it becomes available...
-
x1950 and dell e521 sata
- Forum
the PS I bought: 4X Peripheral Power Connectors for standard IDE (Parallel ATA) hard drives or optical drives 1X Floppy Drive Power Connectors 1X 4-pin ATX12V Power Connector 2X SATA Power Connector 1X 20pin/24pin dual-use Main connector ...
-
SATA hard drive
- Forum
supply with SATA>power connectors or dongles that will adapt existing drive power connectors> to SATA power connectors. >> Bobby > The dongles work fine and can be had for $5 at Fry's or most computer stores. I do agree that there's no point...
-
Why SATA power connectors?
- Forum
Why SATA power connectors?. Hello, I just bought a new Thermaltake 430W power supply and notices the "SATA" connectors. Since I bought SATA HD I used that as power supply, however, me being me, I then switched to the "standard" 4-pin connector (which can...
-
Making your own "+4" connector in a 20+4 setup
- Forum
last 4 pins of the 24 pin mobo power connector are: +3.3v, ground, +5v, +12v As you can see, the wires in a SATA power connector and the wires of the +4 portion of the "20+4" connector are the same voltage with the exception that SATA has an extra ground...
-
Where to buy SATA power connector only?
- Forum
Where to buy SATA power connector only?. I've done a bit of googling and haven't had much luck, so maybe this will work. I have a PC&C Silencer 500w psu. However it only came with 6 sata power connectors, sadly, they are all gone used now... I was wondering...
