IDE-to-SCSI? The docs seem to indicate that you can do IDE to SCSI, presuming that your sysprep.inf has a [SysprepMassStorage] section that defines the SCSI or RAID controller, and the drivers are available somewhere in the image (such as c:\drivers\Perc4SC),...

Rick, your Raid Channels are IDE 3 and 4. WinXP lists them as SCSI Devices even though they arent. That's normal You need to install the WinXP Raid Drivers Promise or HighPoint whichever your system has. "Rick" wrote in message news:1005501c43ee4...

SCSI/RAID Host controller +Plug and Play BIOS extension Dr... Archived from groups: microsoft.public.windowsxp.help_and_support () Hi Guys got a little problem and I am absolutely not tech minded so need to know if the above subject is important as both...

call for help (not > simultaneously). Now every time I boot the computer My Computer shows > an AVX SCSI DVD disk as being installed and device manager shows a >SCSI/Raid host controler as being installed. >> My computer is a Pavillion 7935 with no ad...

GA-EP45-DQ6 IDE DVD Writer shown as SCSI/RAID, not working properly.... Afternoon all, My IDE DVD drive isnt working properly and is showing up as a SCSI/RAID drive on my system. Specs are:- Win XP 32 SP3 GA-EP45-DQ6 F12 Bios 2 x 160gb HD plugged...

kind of error which I forgot). Now I'm formatting the drive. How long should it take to low-level format a 73GB drive? I want to make sure I don't stop it too early, but it feels like it's taking too long. Any help is appreciated! thanks! With SCSI RAID...

an external disk, and see the non-RAID partition? BTW, the M/B will be Intel 965 w/ 6xSATA, RAID controller on board. Thanks for your help everyone! Assuming you have a raid controller that supports what you are trying to do, then yes the non-raid partitions...

Very Hungry Caterpillar - George W. Bush's favorite childhood book. Note: This book was first published a year after Mr Bush graduated from College. Ok, you're using SCSI RAID, I'd reccomend using a PCI based SCSI RAID not integrated. I do not own a server...

or all IDE. My new system is all IDE. It has 2 7200rpm IDE drives, a 16x DVD, and a 8x burner. It is so much faster then the old SCSI system that the slower IDE HDs don't make any difference. Any way if cost is no object go SCSI or raid or both. If...

the TWAIN/ISIS drivers from Canon's web site while on the phone with their tech support people but it made no difference. The SCSI device is set to 6, which I am told is OK. The new machine does have a SCSI RAID hard drive configuration. When I go...