ADS 300 separates - make a speaker box?. Archived from groups: rec.audio.pro () Hi, I have some ADS 300 2 way car stereo speakers from the mid 80's I'd like to make some kind of enclosures for. I have tools, basic woodworking skills and a shop so if someone...

ADS separates - make a speaker box?. Archived from groups: rec.audio.tech () Hi, I have some ADS 300 2 way car stereo speakers from the mid 80's I'd like to make some kind of enclosures for. I have tools, basic woodworking skills and a shop so if someone...

do the research, I certainly have before I purchased the card. For a pair of F*** the BS speakers you will certainlyl shell out at least 800 bucks. That is without a sub though. My buddy has recently purchased a 5 speaker set from Polk, they are RSI series....

pushed into the corners of the room. That's what it's all about! Honestly, 3 to 5 dB variations in the total output of a wide range speaker system is not a problem at all. If you can make a speaker system that is within less than 5dB from some reasonable...

these do a better job than cheap "professional" monitors that aren't, really. Get a set with a subwoofer, either as a matched 3 box set, or a pair of decent speakers and a separate subwoofer. You can make your $300-or-less go further that way, and you'll...

in what is > driving it. This could only work with a truly rigid piston > and I don't know how to make one of those. >> Actually the answer to the thing came to me a bit ago and I explained it briefly in other posts, but speaker cones don't generate...

with the other speaker for a verification. ** Errrr - what sort of twisted logic is behind this drivel ??? > If an AC RMS voltmeter > is available, measure the voltage across the speaker terminals at this > volume with the 1 kHz sine playing...

the entire speaker. So there really isn't much of a resource left other than the factory - and they aren't going to interrupt the assembly line flow to recone a speaker unless they can make enough money by doing so to make it worth while (hence the seemingly...

high frequencies or that a mid-range speaker CAN'T reproduce lower freqencies....they just aren't made for it. In fact some manufacturers (like Lowther) make speakers that are made to handle all freqs. Anyway, a three way system does not automatically...