faxes" to access the printer driver. In the driver select "printer preferences" and set them to the settings you want. Select the "profile" tab and name and save these settings as a new named profile. Now when you access the printer in any program you...

others. There > are other settings for quality, so what does this setting do? What would > the printer do differently for the different types of paper? >> Each type of paper setting tells the driver software to use a different profile for the printer...

would work? I do not know if there is a setting in the HP printer program, I looked but did not find anything. Guess that is just a glitch with this printer? Lorraine. Archived from groups: comp.periphs.printers () On Wed, 02 Feb 2005 17:13:31 GMT, "Lorraine"...

printers in a program like Word and I scroll past the bad printer I get the spool error and have to restart. Thanks, Patrick Archived from groups: comp.periphs.printers () Les Moore wrote: > When I open my Start/Settings/Printer folder and select the...

is not the problem as I can get the windows XP PC to print to the printer, just not through our bespoke program which is looking for a printer called "AIA PRINTER". On windows 9x we set up the printer exactly the same as we do on the windows XP but it...

programs. If what I understand correctly what I've read about networking, all I need do is install a network card in each unit, and do a direct hook up (they're both in the same room). Also, I understand that I must set up the printer as a line unit....

printing from? (Not the printer drivers) Shouldn't that program have a print box which is used to regulate the printing from. You arrange the collate in/from that box. This information is sent to the printer. This is not the printer program box but...

it - its over a quarter of a ton. But you get an A3 contone colour photocopier/printer, and if you can set the network software up properly it should work as an A3 scanner as well. Its the sort of thing a copy shop/printer would have had as their spangly...

TCP/IP Port) Now I want to redirect the lpt output from the DOS program (and only from the DOS program) to this printer. This is what I did: First I made the printer a shared printer and called it HP1320n. Then I used the Net Use command: NET USE...

will need to be part of the ad-hoc network, and you will list > the IP address of the network printer. But the HP printer program should not > care about how you connect. If you can ping it. It should work. >> -- > David Hettel > Microsoft MVP Mobile...