psu on its side. heat problems ??. Hi Like many I'm planning to build a htpc, however I'm trying to fit it in a (395mm H x 175mm W) space. If i use an ATX motherboard (which gives me the most options) then i only have about 80mm to 90mm to fit a power supply....

air out. so that's 2 blowing air in and 2 blowing air out. Instead of 3 out and 1 intake! my Specs What happens if you turn the side fan off, so you have 2 out and 1 in ???? The side fan will be on the lower half of the side as heat rises it should be blowing...

should be good. ye i ahev all the latest drivers, i havnt had a chance to look see if heat is a problem but the case i have Xclio blackhawk has 4 190mm fans and 1 massive one on the side, but heat may be an issue i have contacted EVGA and sent them a picture...

ago. I was talking to her for about 5 minutes and she says she > has to switch from side to side because of the heat. >> I asked her if the heat was on the back or front. She said the > front...where the dialing numbers are. That surprised me. >> Here...

is around 50 C. I don't know what the idle temperature is though. During some problems I had with an AGP Driver from the 4.25a drivers, I had e-mailed AMD to see if perhaps I had a heat problem. I was told that the processor is rated to still be able to...

to see if I can get them to do something for me. You might try the same if you have no luck fixing it. Ripped the whole laptop apart, and luckily read this forum. So waiting for my soddering iron to heat up and then i am going to pray it fixes the problem......

parts I could use and through the rest away. So the first thing I did was to remove the CPU Heat Sink and was stunned to see that there was no processor in the socket. Then it dawned on me to look at the under side of the heat sink. Sure enough, the processor...

i have seen in some recent threads and am really worried over some activity toward the dark side . It seems that the forum is attracting people to the dark side , i have seen Auburn ( since the arrival of the doggie ) even making remarks i would not expect...

was trying to explain to him that you need a high heat source on the other side of the peltier (the cold side) so that the peltier will functoin as a heat pump (its purpose) and move the heat from one side to another. He was attempting to compare a peltier...