I don't understand why >>the firmware upgrade would lead to a decrease in signal strength. >>>>Thanks, >>Kenny Moorman >> I fixed my low signal strength by installing the Sveasoft Satori > firmware from for my WRT54G. It allows you to adjust > the...

the ip address of your computers .. computers may be connected to the network but they might have an invalid ip address ... have you tried using a 3rd party firmware that boosts the signal strength for the WRT54G/GS? Thibor14 HyperWRT should give you some...

notice that the wireless signal strength has fallen through the floor (so to speak). Everything else is working great if only I could somehow boost the signal strength. Can someone point me in the right direction to how I can do this? I suppose I could...

Help with improving signal strength. I have a Linksys WRT54G and the signal strength 2 rooms down is horrendous. The signal gets knocked off everytime a phone in the same room as the computer rings. Would I be better off getting the Linksys WSB (signal booster)...

where it was just on the verge of switching between 4 and 5 bars of signal strength as viewed in the laptop's client manager, then went into the control panel of the base station PC and tested all 11 channnels to see which one gave strongest signal on wirelessly...

other hand, a high gain antenna will maintain the transmitters power output over longer distances and increase signal strength of the received AP signal. Happy Canuck wrote: > You could also go to the Sveasoft firmware for the WRT54G and see if...

Linksys WGA54G wireless G LED. Archived from groups: alt.internet.wireless () WGA54G game adapter connected to an xbox. AP WRT54G WEP is off, signal strength is excellent. Xbox says it is connected and i can play online (same result if i connect the game...

another newbie question about Linksys WRT54G. Archived from groups: alt.internet.wireless () I have a Linksys WRT54G router with Sveasoft FW. I am considering buying a Hwaking external antenna to increase its signal strength. However, it has two antenna,...

to reflect the "G" only configuration (turned CTS off). Here, unlike the old house, the devices settle at 18Mbps, pretty much regardless of what the signal strength is (usually good), which tends to be much better than the old house, where, even during...

and intermittent connection stayed relativly the same. I am pretty much out of Ideas :cry: What signal strength are you seeing at both ends? Try using a program that will give you the signal strength in dbm, such as Network Stumbler, rather than the Windows...