FS Sound Workshop Series 40 power supply& other parts. Archived from groups: rec.audio.pro () FS Sound Workshop Series 40 power supply& other parts $399 good cond working well what else do you need for your board? Nashville. Archived from groups:...

FS: Sound Workshop Series 40 PSU (power supply). Archived from groups: rec.audio.tech,rec.music.makers.marketplace () FS: Sound Workshop Series 40 PSU (power supply) good working and cosmetic condition 'first $459 gets it mm for lots more parts (300,...

Replacement for Schadow switches. Archived from groups: rec.audio.pro () It's time to replace the Schadow switches in our Sound Workshop Series 30. Digi Key carries the ITT/Cannon/C&K F-series and also the E-switch TA-series. They appear to be equivalent....

Thanks in advance. >> Nathan Eldred > Nathan, Is this by any chance for a Sound Workshop Series 30? I replaced the LF351s with OPA604s in the line inputs of my Series 30. They oscillated at minimum gain but that was solved with a small cap connected...

Help Needed With Sound Workshop Series 34. Archived from groups: rec.audio.pro () The high school I teach at was recently donated an old Sound Workshop Series 34 Mixing Console. We plan on using it with our studio recording program but need schematics in...

Ram [*][ff0004] [6] Dell 3007WFP-HC 30in Monitor [*][ff0004] [1] Custom Hexa Monitor Stand [*][ff0004] [2] Multi Card GPU X2 Series [1] Single Slot GPU [*][ff0004...

Compal" units what you are seeing is quite typical. The parts availibility on those is terrible, unlike the normally readily available parts for the "Built by Toshiba" models that the service center quite often gets the day after ordering from Toshiba....

2 gigs DDR5) PC Power& Cooling 750watt Coolermaster V8 CPU cooler WD 640gig Hard Drive 32mb Cache What do you think? I think it's excellent. A GTX 295 card or three GTX 280 cards would have had more raw power, but that HD 4870 X2 can deliver 60...

supply for the box. I rested my hand on the top board as I was doing some probing when my watch got quite warm! (Thanks for the series resistance of it!). I am also reminded of college (DeVry) when the whole class had to build a power supply. The last...

run Hyper-V on Windows Server 2008. Motherboard must support at least 48GB. Background: I currrently own an HP Blackbird II with a EVGA 780i Motherboard and the stock 900W power supply. Steps: I am going to take out the EVGA 780i motherboard and replace...