5V board in a 3.3V PCI slot. Archived from groups: comp.sys.ibm.pc.hardware.chips () Hi, I have a problem with a Dialogic board "DM/IP301-1e1-PCI". I installed that board in a Piv 1.6Ghz Mainboard D845WN and I can't do it starts. The board's power requirements...

5V board in a 3.3V PCI slot. Archived from groups: comp.sys.ibm.pc.hardware.chips () Hi, I have a problem with a Dialogic board "DM/IP301-1e1-PCI". I installed that board in a Piv 1.6Ghz Mainboard D845WN and I can't do it starts. The board's power requirements...

board I need to do it ASAP (RMA window closes in a few days) but I really hope it's not a serious of any issue. I can answer any other questions if needed.. Using a GA-P55-UD3R board here. When I turn on my computer after an extended period of being off...

to 1.5v. Then it would automatically set to 1.5v, but then one day it went back up really high. I don't know if it's RAM or the board that's messing with voltage, but it's ridiculous how it just spikes the voltage whenever it wants. I'll probably just manually...

Would you recommend waiting for the new 32mm processor's? Because remember, this will be a performance build, so I definatley don't want anything worse than the i7 860, or the i7 920. The problem with the 1366 board is that I don't really have the budget....

mother board by ECS, this was due to the fact that the MSI board failed me. Anyway, after I installed the new mother board and installed windows, started installing drivers for the on board C media audio device and my Geforce 6200 AGP 8x graphic card, every...

motherboard and problem went away. Problem also vanishes if you raise the Vcore in the BIOS. But new motherboard, lower vcore, no problem with cold starts. Board I had the issue with was the P5P800 from Asus, I'm noticing quite a few Asus/Asrock cold start...

T-Bird overclocking..... I just installed DHLucke's T-Bird on my re cap ed motherboard and the thing start up. This board is my old Soltek nforce2 motherboard who never ran a CPU at default spec.. I always overclocked them... my mobile 2500+ ran stably at 2.4GHz...

which runs the yellow ones; it works, but has esoteric bugs, and isn't as fast as the Intels. When you start up the board, be sure to do a at the first boot, to enter the BIOS, and execute the "Load Optimized Defaults" function - that should get all your...

Why doesn't the fan spin when connected to the PSU board? I noticed that it start and spins for a second or so after the PSU power switch is turned off... Does it maybe need more amps to start than the board gives? Amp rating of the Antec is from 0.109 to...