16 bit system and dialing tone. Archived from groups: microsoft.public.windowsxp.basics () I receved worning 16 bit Windows subsystem C:\Windows\system32\autoexec.nt The system file is not suitable for running MS-DOS and Microsoft Windows applications....

number, you only have to input the # key to access your voice mail. I'm pretty sure the OP is looking for a special number which will get you right into the voice mail system without having to, 1) call your cell from a landline phone, or 2) dialing *86...

mail). Whenever someone leaves a voice mail message on the system, the system can be configured to dial any number and then, after it hears a dial tone, send a series of numeric data. The latter configuration essentially allows it to send a numeric page...

Delay before Dialling. Archived from groups: microsoft.public.windowsxp.newusers () Before my XP Pro system dials an internet connection there is a delay of about 15 seconds before the modem can be heard. I have previously come across this problem with...

modem worked for a week afterwards. After that week, I would be able to hear the dial tone through the modem's speaker and I would hear the modem dial, but I would still hear a dial tone. It was as if the number had not been dialed at all. If I waited...

in my PC when I hit the following problem. I use the 'Send Fax' wizard and upon clicking 'Finish', I hear the Tone but before it could dial the number, the system responses with a 'No response'. The tone only lasts for a mere 1 second. Is there...

try to dial out? Littleberry sounds to me like you either got a faulty modem or a very quiet dial tone. try setting it to dial without detecting dial tone. you have to do this in the modem properties and in the dial up profile properties. i learned the...

her grandma and since then the modem cant find a dail tone... Or is the modems connecter bad and not hooking up the cord right... What do yall think? Buy new modem? or is it a setting in windows thats not right... ITs set to tone dialing. Also th laptop has...

enable send' is ticked. If that's still OK, make sure your telephone line has a normal dial tone. If not, set your modem to ignore the dial tone (Control Panel/System/Hardware/DeviceManager/Modem Properties). Don't make the mistake I made and try...

the line coming from old provider at DEMARC--run line to telephone jack for ATA router (phone plug on adapter) all phones on house wiring will have dial tone. Step by step instructions available at vonage web site -- ivscorp Archived from groups:...