Can I install the drivers to the new system& mobo while the system is in safe mode and still have them work properly in Normal mode (provided it boots and stays stable in normal boot)?? If both systems really are identical (same motherboard and BIOS) and you...

or do you have a questionable piece of software installed? I have a computer and it does weird stuff. please help. Ok here goes: Got fed up cause the system would not stay stable long enough to even post a darn help thread. The only thing I could do...

have to stay AGP.. and I'm wondering how much of an upgrade I could really get from that. I've also had some major driver issues with this card, I've had to stay with really old drivers so the system stays stable. Every once in a while I would try the newest...

Operating System. Using another system, you'll need to locate and download the 32-bit drivers from the individual manufactures for the system. Then if you can get into windows on your system, you'll need to install these drivers. Gateway does a poor job...

I've been thinking ______________ Welcome to my Shed of Pleasure could try up'in the vcore of the cpu to what it was when u were oc'ing and see it it passes for longer? And does your system stay stable on the desktop at stock? Or does it stuff up (kick...

system will stay stable. Wait a few days and buy one of the new 1.53GHz Athlons, under 1.8GHz AthlonXP name. Much better than any plain equal Tbird. KT266A chipset is an EXCELLENT choice. Yes, it will be an excellent system. However, I have a few suggestions....

what u said and again the problem happened , i did reconfigure the bios to load safe performance and did check the ram one bye one , then 2 by 2 , the systems stayed stable and i did play call of duty4 for about 45 minutes then it happened again .. i believe...

that supplies this voltage, its reference is probably way off. If it isnt affecting the stability of your system, you might want to overclock the system a bit, increase the FSB in steps while the system stays stable. Increasing frequency needs increase in...

are experiencing some unstable behavior from the rest of the system, I don't think the motherborad is fried. Cool sounds reassuring every thing in the bios is at default settings and the system stays stable untill i get that chessbord pattern on the screen....

this be any other sort of virus? I no longer think this is a power supply problem considering the system stays stable when not in use or just sitting in bios. James I am one hairy bastard Could be your PSU still. This tends to ba a very overlooked...