queueing change RAID behavior? It would not surprise me if command queueing tripps up the striping that the RAID adapters are trying to do. And, what about defraggin RAID arrays? Is that a good thing, neutral, or a bad thing? Thanks for the recommendation!...

Gigabyte EP45-UD3P ICH10R RAID 5 2TB Drives Not Working. Hi. I'm using a Gigabyte EP45-UD3P (which has ICH10R RAID) and am trying to build a RAID 5 stripe using 5 Seagate 2TB drives (ST320005N4A1AS-RKs, to be exact.) I'm running the most current BIOS on...

Cannot Enter Raid Utility. This is the first time I am trying to set up a RAID so I am sure there is some small step I am missing here. I am trying to build a raid on my Gigabyte GA-M61P-S3 using (3) WD RE2 Drives (model# WD4001ABYS BM). These drives are...

your raid array to another board with ICH10R. Also, did you know about Intel's Matrix Raid? This simple feature alone should keep you from moving to hardware raid because you can create a Raid 0 array for the OS and a Raid 5 for file server all on the same...

both on hdmi if possible (or dvi if that's easier and not any worse quality). I want to RAID 0 two 500 gb 7200 rpm sata drives together, and eventually probably change that to raid 10 and 4 drives. In the beginning, i will only have one video card, one dvd...

Planning RAID 5 with four 1TB drives. Hello all. I am planning on building a RAID 5 array out of four 1TB serial drives (maybe four 1.5 or 2TB drives) with a Serial PCI RAID card. My motherboard is a GA-8KNXP motherboard. Am I going to have any issues regarding...

the first 1TB drive? If it helps, I am using Windows 7 RC and my motherboard is Gigabyte GA-MA78GM-US2H 780G AM2+ mATX. Thanks! Even if you can, I'd still suggest you back up all your data first. Something may go wrong while you're building the RAID array,...