Hantarex 25" Monitor tube/chassis $25 - Michigan. Archived from groups: rec.games.video.arcade.marketplace () Available for pickup only - Hantarex Polo Monitor - nonworking (was working). No burn, dark screen, just want to get out of the house - too many...

hot tube chassis?. Archived from groups: rec.audio.pro () does anybody out there know how the old tube chassis on radios, amps, and tv's were always grounded hot from one side of the power cord. well my question is were the printed circuit tube chassis grounded...

inside a monitor, but as I was told it is >not dangerous if I just stay away from the "tube connetion" on the "tube" >(in top of this picture >>But from the "tube connection" the wire (orange color) goes to a print-card >(see this picture: >Now...

groups: rec.games.video.arcade.marketplace () Hello everyone, I'm looking for a Wells Gardner K4600 Monitor Chassis. I have an original Electrohome Tube with no chassis and from what i know you can either connect a GO7 or a K4600 as they fit the Yoke....

res tube until after the fact. I'm pretty sure the only thing that makes it med res is the yoke and chassis, not the tube. If the chassis is switchable to display med res. or std. res on the same tube, seems to me that it implies that the tube is the...

Trivia wiz cabinet. Comes with control panel, wiring, & marquee. > Monitor included, untested (no power supply, no desire to test it). >> 19" monitor tube. No chassis. >> 19" TOEI monitor. Chassis was capped, doesn't work. >> Monitor glass off...

stuff that clicks and whirs. Nothing in the digital world compares to... * Big, shiny Scully or Neumann lathe, * Ampex VR-1000 2-inch video tape recorder (w/ 3 racks of tube chassis), * Gas-fired Merganthaler Linotype machine. Those are the prime exhibits...

Deluxe New Tube Project Chassis on eBay. Archived from groups: rec.audio.tubes,rec.audio.marketplace,alt.guitar.amps,rec.audio.tech,sci.electronics.design () Deluxe new chassis for tube audio projects available on eBay, starting at $1.00. See: Thanks...

of the monitors and use them with my spare Go7, wells garner 4600 chassis and make a working arcade monitor? ~PAul Archived from groups: rec.games.video.arcade.marketplace () In most cases you can swap the same sized tube into a different chassis. Take...

WTB: 8 pin 13" tube. Archived from groups: rec.games.video.arcade.marketplace () I need a 13" tube with a 8 pin neck. I have an 8liners chassis, but no tube. I would prefer low impedance (11 to 17 ohms) but can convert the chassis for high impedance. If...