turntable connection. Archived from groups: rec.audio.tech () I recently purchased a digital receiver and need help with the audio component connections. I need to connect a turntable (yes, I still listen to records), cassette deck (in/out), CD player,...

There's a trial version. Using your receiver and Bose will be better than any PC speakers. While the audio is good I don't think you'll ever get the quality you would with a CD player or turntable connected directly to the receiver but still very good I...

detailed instructions as my savy is limited. Would appreciate any thoughts. If you can't afford a turntable that connects directly to the PC, about $100, then you're going have to run the turntable through the audio out of the amp to the audio in of your...

in your system. It can be in your stereo itself, an outboard box, or built into the turntable but you have to have it somewhere. If it is outboard the turntable connects to it and it connects to any input on your system (say tape, aux, or vcr)Some phono preamps...

LP/Vinyl Convert to WAV File. Archived from groups: rec.audio.tech () A friend wants to convert some rare LPs to his computer for making WAV files. He has a Creative Labs Audigy 2 Audio Card. His turntable is connected to the phono-in jack of his receiver,...

with this? This is a good place to start. I'm planning on doing after we move but did some research about a year ago and found there are some turntables that connect directly to the computer, they have a built in amp so you don't have to run them through a...

have a source (my turntables ^^) connected to the auxiliary-in of my Auzentech X-Fi Prelude soundcard, and the spdif-out of the soundcard is connected to my dolby digital receiver via optical cable. My problem is: I can see the signal of the auxiliary-source...

an Aux input. Does the hum persist? If so, the turntable is not the main > source, though it could still have a bit of hum - many do. > If not, then the turntable may have a bad connection internally, or bad > cables. > If there's still hum while the...

much every grounding connection I could think of: one from the turntable to the preamp, one from the preamp to the PC, and one from the turntable to the PC. I still kept hearing a hum. I tried disconnecting my cable internet line, and it made no difference....