- Content type
- Reviews (520)
- Forum (13104)
- News (58)
- Picture Stories (4)
- By relevance
- By date |
- Sort :
-
Understanding memory timings
- Forum
Understanding memory timings. I have been trying to understand memory timing numbers and how they work with the Front Side Bus (FSB) and memory speeds to determine memory transfer rates to and from the CPU. The following table shows the relationship between...
-
MEMORY FAQ (please read before posting)
- Forum
MEMORY FAQ (please read before posting). A GUIDE TO UNDERSTANDING MEMORY INDEX [#ff0000] 1. KEY TERMS 2. MEMORY MODULE FORM FACTORS 3. MEMORY MODULE TECHNOLOGY 4. RAM TECHNOLOGY 5. MEMORY MODULE IDENTIFICATION 6. MEMORY CHIP IDENTIFICATION 7. MEMORY...
-
I dont understand memory timings 4-4-4-12 5-5-5-15
- Forum
I dont understand memory timings 4-4-4-12 5-5-5-15. I know what values are supposed to be 4-4-4-12 or 5-5-5-15 when OC'ing but thats only half of the values that I can actually modify in my DRAM settings, do I leave the rest of them to automatic???? Also...
-
HOWTO: Overclock C2Q (Quads) and C2D (Duals) - Guide v1.6.1
- Forum
after that are the main timings (clock cycles). In general, the lower these numbers are, the faster the memory. For more on memory timings, see . • The first part is self-explanatory (DDR3 memory). • The number after it is the data transfer rate....
-
Tight Timings vs High Clock Frequencies
- Reviews
by the end of this year, the situation gets even worse. Here, memory timings are further relaxed for the sake of bumping up memory clock speed. Even if you don't understand what memory timing parameters actually stand for, it is still easy to understand that...
-
$2400 Gaming PC
- Forum
overclock this as long as I can stay stable being on for multiple days at a time** with $87 $290 $180 **this is one I'm really unsure about-don't quite understand memory timings, voltages, etc.** $630 **Brand chosen due to same manufacturer as motherboard...
-
Prime95 BSOD's at stock speeds on i7 920
- Forum
are 7-7-7-20, 1600 mhz Fresh install PSU is about one year old. No extras to try, unfortunately. Have you ever tried just setting everything back to auto, and letting the mobo do what it finds comfortable? I understand about the memory timings,...
-
Overclocking Problems (noob)
- Forum
240 and I know that is because of memory. relax the memory timings a lot then see how far you can push the cpu. Once that is settled go back and start working on the memory timings. Check out the excellent overclocking guides among the forum stickies. I...
-
Gateway FX 6800-01e BIOS Update from Gateway Unsupported
- Forum
in regards to using the jumpers. You could try pulling half the memory, seeing what the BIOS says, then shutdown and replace the memory with the other three sticks to see if there is any difference. Cause if the memory is running under clocked and CPU-Z...
