Nothing is fool-proof. Fools are Ingenious! There should be jumpers for the multiplier (I haven't ever seen a Socket7 board with BIOS jumper settings). If your board doesn't support any voltages between 2.2v and 2.8v, you'll have to go for 2.8v or pray it...

Upgraded AMD-K6-2 380 to 533, need jumper settings. Archived from groups: alt.sys.pc-clone.compaq () I need to give everyone an update. I had also posted my original query in AMD's forums at in their Older Products Troubleshooting forum. Someone there...

the jumper settings. I'll need some help in doing this, as I have no idea what changes to make. The user manual from Compaq has no info about jumper settings. In fact, they say in the manual that if you want to upgrade the processor, an authorized Compaq...

anything outside of the basic BIOS setting or the ASUS AV Rack utility on software settings *Was hoping some kind of jumper setting on board to put audio through the rear* (even though I have not messed with this in the past) = still no sound 6) Checked...

it's a hardware modem. You can scan for it when it ask if you want to scan for non-PNP devices (this takes a while), but if the jumper settings conflict with another device it still won't work. There might be a PNP jumper setting as well, which would be easier....

I have tried a single 512MB DDR400 RAM and also 2X 256 DDR266 RAM. No problem with either when jumpers are set to 133MHz, but lockup on setting jumpers to 200MHz. PSU just been upgraded to twin fan 550W as I thought that my lowly 300W PSU may have been the...

the MB, I specified the PC-100 RAM for the day I decided to upgrade the cpu. Anyway, I thought the jumper was set to 2/3 because I was running the 66MHz Celeron. When I put the cpu in, it appeared to be already jumpered to 1-2. I have suspected that this was...

any jumpers on these laptop drives as >they arent designed to be put in with other drives. I did wonder whether there are any jumpers, the manual for the M700 does not show any jumper settings. > (this may not be the >case with that side-bay drive...

done in Setup, including processor speed and bus frequency. Do not move this jumper with the system power on. System Configuration Jumper Settings Normal Mode This mode is for normal computer booting and operations. Connect pins 1 and 2 with a jumper...

jumper setttings can be referred at the following site. 4) There is no jumpers or BIOS settings to overclock the processor. Hope the information helps.. I want to upgrade my processor in my Presario 5020, but am getting conflicting information from...