you'd just need a suitable inexpensive PCMCIA card adapter to hold your SmartMedia cards and someone at least slightly familiar with FDISK, or determined enough to plow on regardless. Archived from groups: rec.photo.digital () ASAAR wrote: > On Sun, 03...

that the PCI-e connector on the PSU could possibly be configured differently from what the GFX card needs? Would be it relevant to try using the card's own molex adapter? EDIT: I've had a look at the card's adapter, and the configuration appears to be the...

my card with the default settings. Rgds Andres. Archived from groups: microsoft.public.windows.networking.wireless () I have just installed a Linksys Wireless-G 802.11g notebook card adapter and I am unable to connect to public hot spots ( eg. in airports...

I need to set up? I am using my card with the default settings. Rgds Andres. Archived from groups: microsoft.public.windows.networking.wireless () I have just installed a Linksys Wireless-G 802.11g notebook card adapter and I am unable to connect to public...

defective, then your solution would be necessary. If not, the OP may want to use a card reader anyway. I'm not familiar with how common it is to get card readers supporting xD cards. If an adapter is needed, it may well cost more than the card reader...

but it's only a slight preference. What you'd get for a PCMCIA slot, though, wouldn't strictly be called a card reader. It's just a simple card adapter that lets you use your SD card as if it were a PCMCIA card. Archived from groups: rec.photo.digital...

space to hold much map data. Thus, I came up with the idea of the PC Card Adapter to allow me to use my SD card.) If I can get this to work I'll have a great little GPS device for only 60$ - the phone to ipaq cable and the pc adapter card. Using Pocket...

unfortunately with the PCI card, it won't fit in the case (probably a quarter inch more and it would fit). I was thinking of buying this cable: inserting the adapter into that, and the PCI card into the adapter. It would then be hanging out the back...

memory using an existing SD card. Here is the problem, I've found a number of 4-in-1 pc card adapter that accept SD, MMC, memory stick, etc. So my idea was to use the pc card adapter and an existing SD or memory stick to increase the ipaq's storage capcity....