USR9106 router - Problem with Port Triggering. Whenever i try to add ports in the NAT -- Port Triggering screen, my router just stops working(no connection with network and internet) i have to manually switch it on and off for it to get a connection again....

send simple TCP text messages to each other over a LAN using LocalHost on port 2000. I'm now trying to get them to communicate over the Internet. My setup is two computers connected to a USR9106 router/ADSL modem. I set up port triggering in the 9106...

it. As I can figure out, both 'lines' come via the same port and there is no way to program the router to which phone (IP) to forward the call. Draytek 2600V routers have two VoIP ports, but AFAIK at the moment they can't handle two 'lines', although...

not sure what this means - most recent VPN clients work without any help > from the router - so long as they are configured in the right way. OK - so what you are saying is that the whether this works or not should be independent of my router/gateway hardware?...

the same problem? Is there anything I could do to speed up? Thanks for any feedback. Claudio Archived from groups: alt.internet.wireless () I just installed my ADSL gateway (USR9106) to a desktop (directly) and a > laptop (wi-fi with a USR 2210 card)....

Wireless network. Archived from groups: microsoft.public.windows.networking.wireless () I've recently upgraded my USR9106 with the the new firmware and unfortunately I've lost my internet connection. My internet service provider is BT Broadband. Can anyone...

or the wireless card for the T5? Feedback? >> ~Himm I use a DLink DBT-120 to my T5. I can hotsync almost anywhere in the house. Archived from groups: comp.sys.palmtops () I have a USR9106 and can get online anywhere in my apartment. I have also used...

address of THEIR DNS server will pretty much never change. Not something you should worry about. It's always the one thing you never suspected. you should read up on port triggering. you can set the router up to forward the needed ports to what ever computer...

a firewall appliance or app between client and server end nodes, you need to punch holes in it - or exploit existing holes; if there's a router, you need to explicitly manage application port traffic through said router - or again, exploit an existing rule......

is a Netgear MR814v3 take cable from wall and insert it into wan port on router reset router defaults now set up port triggering for dc++ ports now plug comuters into lan ports on router you will be assigned a 192.168 address dont worry about it as long...