S video out from dish 6000 won't work with a 5040 ?. Archived from groups: alt.video.ptv.replaytv () I read a little bit about having to change from input 1 to 2,then telling the replay to use the S video on input 2,and setting the input 1 to nothing,...

S video out from dish 6000 won't work with a 5040 ?. Archived from groups: alt.video.ptv.replaytv () I read a little bit about having to change from input 1 to 2,then telling the replay to use the S video on input 2,and setting the input 1 to nothing,...

same price that > have better quality? I see people with those dish receivers for sale, > do those work at terrestial hdtv receivers without paying for any > service? I understand that the Dish 6000 will work OTA without Dish Service. But (a) it must...

able see any video from KGO-DT. I get plenty of signal on channel 24 (007-1 and 007-2), but no picture. Also it locks up my Dish 6000 receiver, and won't allow me to change the channel until the reciever, after about 10 seconds, removes the channel(...

hair better than SD, even though it was all knocked down to NTSC going to the TV. Del Mibbler Archived from groups: alt.tv.tech.hdtv () I've had a Dish 6000 set top box for about four years. I connected it to my 10 year old GE 27" and enjoyed the...

require any setting to enable (note that component video DOES) amd is active at the same time as composite video. Your unit may be defective. S-video isn't that different from composite video, so the problem is probably something simple like a broken trace...

require any setting to enable (note that component video DOES) amd is active at the same time as composite video. Your unit may be defective. S-video isn't that different from composite video, so the problem is probably something simple like a broken trace...

to a 5040: Works fine 4. Replay mode from a 5040: works fine 5. Other Issues: Occassional severe pixelation on local channels. I was thinking that this is an issue with the satellite but does not happen on the 5040 (but...

to a 5040: Works fine 4. Replay mode from a 5040: works fine 5. Other Issues: Occassional severe pixelation on local channels. I was thinking that this is an issue with the satellite but does not happen on the 5040 (but...

due to different HD fan response levels.... Archived from groups: alt.tv.tech.hdtv () I have a Dish 6000 - it did as you ask for the last 3 years. I truly enjoyed watching HD on my old 27 inch GE. Then I bought a 32" SANYO HDTV - no comparison....