2603 search results for voltage connectors
OK
Ad
  • Locking RCA Connectors - Forum

    safe regarding voltage assuming you're within the working voltage of the connector in question. An RCA connector is probably rated at 300V, but I wouldn't use it above 10V as it's not especially well protected. For high voltages and currents, there...

  • Do I have a dead motherboard? No beep, no BIOS screen. - Forum

    up the PSU while the connector was unhooked. The PSU fan runs fine. With a digital multimeter, I tested all pins on the 24-pin ATX power connector, plus the 4-pin CPU power connector. All the voltages are correct. the 3.3v, 5.0v, and 12.0v values are all spot-on....

  • Asus P4T: High Performance - Reviews

    its hefty price tag of over $150, the board provides an extraordinarily stable foundation for fast Intel Pentium 4 processors up to 2000 MHz. One lonely voltage connector for the Pentium 4. The remaining power connectors are on the edge of the board. ...

    In this review
  • 115/230 Volt Power Supply - Usable Everywhere - Reviews

    We put to the test an entirely new water cooling system for overclocking AMD Athlons & Pentium IIIs.. Powerful Enermax power supply. The power supply has modern voltage connectors (ATX12). When we tested the previous Koolance system, we took offence at...

  • Replacement hard drive voltage - Forum

    should be fine. Ok, so using a different voltage hard drive than the one it originally came with won't damage anything? All drives use standard voltages. If the connector fits, the voltage is fine. Voltages are part of the connector standard. If the connector...

  • Intel fanboy's - Forum

    Intel fanboy's. Hello i'm new to the forumz been reading them for about a month and been reading thg for about a year but i've been a geek since birth(video games). Ok here's my question why is it that 99% of all intel fanboy's i have met are such...

  • X1950 Pro Fan Issue - Forum

    the power to the 3pin connector to the fan on the backside of the card, and getting 12v to the two outside pins. I 'manually' gave the card 12v to the fan, and the fan spun up no problem. I further checked the voltage at the connector to the fan - 12v again,...

  • IBM and Hipro power supply - Is it a standard ATX? - Forum

    it estimated me over my current PSU's rating . [b]My first question: Does IBM use proprietary connectors? [/b] I hope to put a standard ATX PSU in this machine. Further questions (assuming it is a standard ATX connector): What are some good...

Ad