Manually Setting CPU Vcore and NB Freq and NB voltage HELP!!!. Hey guys In my other post i stated that my phenom 9950 was running at 50-53C on idle and about 61C on full load. Someone mentioned to me that my Vcore is surpose to be below 1.3v well mine...

P5Q with 8GB of RAM - Voltage help. Hi guys, I was wondering if someone could point me in the direction for system stability :) My machine looks like this: Asus P5Q Deluxe Core 2 Quad Q6600 2.4GHz S775 EVGA GeForce GTX 295 4x2GB 240DIMM PC2-6400...

Voltage help with core i7 and memory. Ok, i'm building a new computer and the recommended voltages for the Core i7 maxes out at 1.35 and the Patriot RAM i'm looking at recommends 1.65. Can the ram be run at a lower voltage with the same performance and without...

Confused about RAM voltages. Help!. Hello, You probably get this problem a lot, but I do not want to risk a failed startup when I build my first computer sometime in July. I have almost my entire rig set out, but I cannot seem to figure out this memory voltage...

Core Voltage Help. Hi everyone, I just curious about Core Voltage. I recently change my PSU from 145W (yes, sound pity but it's micro-ATX) to 250W and I got Core Voltage reading change. I have to admit that I have no clue what are these voltage referring...

Need help on changing the cpu core voltage. My system hangs randomly. After reading some posts here, I think that maybe raising the cpu core voltage will help. My system's current Core voltage is 1.72V. Can anyone give me step by step instructions on how to...

the fsb or changing the fsb:dram ratio? Well underclocking the RAM and lowering the voltages will help it out a bit. It'll make your RAM last longer and be more reliable, and with lower voltages, much cooler. It takes the strain and load off the memory essentially,...

The right voltage. Help me guys :smile: Imagine I have XP 1700(1466 Mhz) at 1.5v (I don't have it yet, someone to know when we will see it?). I want to downclock to 1000 Mhz. What voltage I should set?(I guess I must lower it, not to damage the cpu) Will...

Win2000Pro). When set at 89 or above Windows won't start at all. At 100Mhz i can't even boot (monitor doesn't turn on), even with 1.95volts. Do you think that a higher voltage would help me to run @90MHz FSB speed or higher? And if yes would it be safe enough...

NB voltage help??? looking at my temps I won't care upping my voltage to 1.5+ I just need more peoples insight on this and yes I lost the chip lottery :( ^ As long as your temps are fine and you dont mind going higher than intels max voltage then id...