VOLTAGE AND TEMP NOOOOOB HELP!!!!!. Hey guys Well i got my new replacement PSU today. and i think all is well. well i looked in the bios and it said that the +5.0v was running at 5.2V, is this normal? and does it pose any threat? here is a screen print...

P4PE voltage and temp problems. Friend would like help on this: --- I recently bought a P4 2.4b (C1 stepping) and a P4PE Asus board. I notice in the Asus probe 2.19.04 and in the bios that the Vcore voltage is around 1.65V and not 1.525 as the setting. I...

are misreading your voltages and/or you haven't configured them correctly. If your system is running stable and performing like you wnat it to, then you shouldn't be overly concerned with the V/Temps. Check your voltages/tamps in the BIOS and see if PCChips...

CPU Voltage / Temps .... I have an AthlonXP 2500+, but the question would be suitable for any processor we may have. My CPU runs perfect at 10x200 @ 1.65V. However, in an effort to decrease temps and power draw, what would happen if I decreased the Voltage...

Of Watts, voltage, temp, stability & psu's. two moderately interesting articles for those wanting to understand more about how overclocking effects things... and how to calculate CPU temps. <A HREF="http://www.overclockers.com/tips506/index02.asp" target...

asus, iwill, voltages, temps and overclocking!. well my asus a7v133 died last week. constant ide controller lockups were NOT doing much for a. my sanity b. my productivity or c. data and device integrity. it was probably partially my fault, though...

asus, iwill, voltages, temps and overclocking!. well my asus a7v133 died last week. constant ide controller lockups were NOT doing much for a. my sanity b. my productivity or c. data and device integrity. it was probably partially my fault, though...

I have tried the settings at 175*21 (3.67Ghz) with no voltage adjustments to the CPU/QPI/or NB. The temps were 46~48C at Idle and Mid 70's C once under load. Also, 190*21 (3.90Ghz) using Vcore 1.28V, but the Load temps were 77~81C and Prime95 BSOD within the...

is running for an hour right now, still stable. Oh and i set the NB voltage at 1,55 v. Check the Intel site for max voltage and temps. Hey everyone. My email notification must have stopped on this. Didn't realize I had this many responses. Okay. Here's...

giving it less voltage and raise in increments....... PS: If your AC is on and you are getting almost 70c, then its obvious that the ambient temp is not to blame... Whats your voltage right now? i been running amd overdrive stability test for 22mins and...