VPN over Vonage Router. Archived from groups: comp.dcom.voice-over-ip,comp.dcom.vpn () I have a Linksys RT31P2 router for my Vonage VOIP connection. Everything else works fine, but I cannot establish a vanilla Microsoft VPN connection thru it. Topology is...

into another wireless router cause problems? I would probably have to turn off DHCP on the Vonage router and give it a local IP (192.168.1.xxx)??? Also, I realize that I could put the Vonage router at the cable internet access point upstairs, but it's in...

Vonage router? There are 4 computers in our house so only 3 can be plugged into the d-link so 1 port is free to hook up to the Vonage router.. My network goes Modem > D-link 4100 >Vonage router. Ever since I replaced my old router with the D-link I have...

Vonage router? There are 4 computers in our house so only 3 can be plugged into the d-link so 1 port is free to hook up to the Vonage router.. My network goes Modem > D-link 4100 >Vonage router. Ever since I replaced my old router with the D-link I have...

if there's a network related problem but I don't think that the ping will necessarily tell me much because I don't (yet) know the IP address that my Vonage router is talking to. A ping message is also small in comparison to the voice traffic - so it is...

If I do not have the Vonage adapter on, and connect using VPN on the laptop, everything works. But I cannot use Vonage and VPN at the same time. I've tried power cycling everything (cable modem, Vonage router, SMC router, and laptop) and connecting in different...

things that I will check is that the cables are well seated. The Vonage router has been rebooted . I need to find the cause for the interruptions between Vonage, Internet, and Comcast. Chris cjtwantstoknow Archived from groups: comp.dcom.voice-over-ip...

the help >> Victor > Archived from groups: comp.dcom.voice-over-ip () Most likely they (Vonage) do not have your router in their database. You will need to call them and have them add it in. I had the same problem when my original router went up in...

wireless router and Vonage router are connected to dlink> small hub for extra ports need for another computer. I disable the DHCP in the Vonage but I still get lag so im not sure if its this but knowing it takes bandwitch I think. Should I put a low priority...