Weird DHCP behavior. Archived from groups: microsoft.public.windowsxp.general () I'm not sure if this is right news group, so sorry in advance if its not. We have a printer that is setup to print via an Ip address on a small (less than 50 users) network....

Weird DHCP behavior from MN-700. Archived from groups: microsoft.public.broadbandnet.hardware () I've set my MN-700 DHCP to use a pool from 10.10.10.100 up to 10.10.10.253. But for some reason, the first time I got an IP asigned it was 10.10.10.144. After...

and DHCP-serves the PC from its central DHCP server, which also serves as an inventory of networked computers on campus. Departments are encouraged to get firewalls, which must be transparent and capable of DHCP relaying. Departmental subnets work whether...

the default DNS server but when I check the status it says DHCP client disconnected, the IP adddress Subnet amd DNS are all 0.0.0.0, and when I click on renew DHCP server it just times out. Another weird thing is the clock is stuck on 2002 unless I switch...

Weird Behavior. Archived from groups: microsoft.public.windows.networking.wireless () Hi all, I would appreciate any assistance on this. I'm in a situation where I can't find the answer to my problem, even thought I've stressed a long troubleshooting list....

step, since it is a DHCP/Networking issue, is to try and reset the service. run the command netsh winsock reset I tried to reset winsock which didn't change anything. All the services DHCP is depending on seem to run flawlessly, but it just wont start up....

and I can browse the network, though I have to authenticate before attaching to a network drive. What's really weird is that sometimes everything works fine (but just once before usual behavior reappears)! I have set wireless properties to authenticate...

No Remote Desktop After SP2 Install. Archived from groups: microsoft.public.windowsxp.work_remotely () Hello All Right, basic problem is that I can no longer get Remote Desktop to work from my Windows XP main system to my server running Windows Server...

System Configuration Utility and after much troubleshooting narrowed down the service that is causing the slow down to the DHCP client. Does anyone know why the DHCP client would cause this behavior and how to fix it? Thanks, Colleen. Archived from...

from the network. Eventually I got it back by manually entering the IP addres, gateways, etc... (don't know if it was DHCP before, but might have been.) and removing the QoS program(?). Now three other machines which are DHCP addressed stopped working. Again,...