Any cases to fit enhanced extended ATX board?. I have EE-ATX board from Supermicro. I had thought a CM Cosmos 1000 would work for the board. However 5/10 board holes dont line with the holes/standoffs in the case. There was a post over at arstechnica - this...

Case Fron panel wiring to mother board - Question. Hi, I recently bought an MSI 648 MAX mother board and a Jupitor Sky Aluminium Case. To connect the front pannel wiring to the mother board, the mother board provides a set of Intel compliant pin set having...

Looking for el cheapo slot 1 board and case!. Anyone know where I can get a supe cheap mobo thatll do a 500mhz p3 and a case. I am looking for SUPER cheap. I have found cases for 10$ but with 20+ for shipping I may as well get a ncie enlight case for a few...

new board/case, problem. i'm sure this sounds stupid, but i just bought all the new components to put my system together and i don't think there are any spacers to put between the mobo and the chasis in the case? Is this possible? What should i do?. i'm sure...

same as in my prior postings! Just to be sure of no shorts to case, I bread boarded out of case (Pic.) same as above! Intel Board (the bad one) had a speaker on it, the Gigabyte don’t, nor does the Gateway case have one! Found speaker on a older machine...

Dell E510 Motherboard based on a retail board?. Some manufacturer motherboards are based on board available retail. I have a Dell e510 and was wondering if anyone knows if the e510 board is based of a retail board as well. Dell calls this board a RD203 KF623...

stick with Intel, even if costs little extra. What do you guys think about these "barebone" systems, the company puts all the parts together (CPU, board, fans, power supply) into a case and tests it. Then I would just put my hard drives, video/sound cards...

processor and its cooler/fan should be inserted and seated before attaching the board to the case.) Any unsupported portion of the board or holes in the board not matched up to posts should have plastic standoffs inserted. For a hole in the board without...

is different. You cannot use a standard board in these cases - they will require extensive rewiring and other modifications to take a standard board. Best bet is to replace the case and power supply with a new board. "sogs" wrote in message news:...