the multiplier because I just kinda assumed that the multiplier was locked since the chip is not an "extreme." I was doing some reading, however, and it seems that with the Q6600 (G0 stepping BTW) that although you can't raise the multiplier above 9, you should...

Emaxx mcp61p-avl multiplier. wala po bang multiplier ang emaxx mcp16p-avl? and yung FSB adjustment niya di ko rin po makita thanks in advance. wala po bang multiplier ang emaxx mcp16p-avl? and yung FSB adjustment niya di ko rin po makita thanks in advance ...

My multiplier keeps changing help!. I got amd athlons dualcore 2.41 ghz and its mutliplier is suppose to be sen on 12x (2.41 ghz) but its set on 2.5(ghz) so i changed it in the bios to 12x and everything went fine for 6 months, then it suddenly chanegd back...

the multiplier on AM2/AM3 processors so it will not affect it. You are absolutely right about the memory speed being slightly off when the multiplier is uneven ... well has the .5 at the end... However I am not one who can explain why... I simply noticed it...

Cpu multiplier is not constant. i have a intel core 2 duo 2.66 ghz E7300 processor i have recently installed cpu z on my system i found out that cpu multiplier is 6 instead of 10 and it fluctuates how can i fix it to 10? . i have a intel core 2 duo 2.66 ghz...

a 710 x3 with a locked multiplier, and i can't change it at all, neither up or nor down (computer won't post, reloads bios defaults either way). Confused. Will OCing this launch version be the same as OCing it with the multiplier? Or will there be differences?...

Multiplier only goes to 21. i have a i7 860 with a p7p55d asus motherboard with the turboboost enabled but my multiplier never goes above 21 and my is always at 2.8 gig with cpuz, i even changed the c-state to c6 and still no apparent turboboost, please someone...

I can't change my Core 2 Duo multiplier in bios. I got an Core 2 Duo E2160 which should be working with 1,8 GHz (200x9 in Bios) but for some time my multiplier stuck on 6x and i can't seem to change it from that value so now my CPU works with 6x200 which gives...

for my specific RAM, and desired speed (3.5ghz). the fsb*memory multiplier gives you the speed that the memory is running at. If your memory does not work at too high of a speed then you can lower the memory multiplier. so 2:00D would be what speed?...

I7 multiplier jumpy on ASRock X58. Not sure if this is a known issue with this board (ASRock X58 Deluxe) but when I set my i7 920 to 171 bclk and x21 multiplier, the motherboard will report it as 3.59 GHz, but in CPU-Z the multiplier will jump between 20 and...